Good on you for doing it yourself. Follow the manual, take your time and its a satisfying job. The worst bit is stripping all the bits of for...
Battery voltage with engine off 13.15 ? ? Should be 12.7 ish. Im going to say battery is the problem
In the above 11 is the pad retaining clip and 19 is the pin which goes thru the hole in the pad. Are these bits in good order ? Does 11 seat...
[ATTACH]
The caliper slides on its mounting bracket so are the slides lubricated and the caliper moves ? I had the same problem getting the pad in...
A good battery at rest should read 12.8 and shouldn't drop below 10 when cranking. If the volts drop as the revs rise your reg/rec is toast.
Err no. 4,5 and 6th gen clusters are all very different. Ebay is your friend here but make sure the pcb is good. Message the seller and get an...
Kill switch on right handlebar .
Hopefully a water logged dash connector. . . Or get your money back
Flooded , now the plugs are wet. Get them out , dry them , put back in and she'll fire up. My first car vw polo was a bitch for it
Tank, airbox then throttle bodies. The rail the injectors sit on unbolt from underneath so the bodies have to come off. It a pita but not hard to...
I had a lovely little cbf250 i used to commute on and that suddenly developed idle issues. Drove me mad not knowing. Turned out to be the choke...
The sms is on the caliper bracket so get it off and undo the brake lines and disassemble the thing. Youll need circlip pliers and check the...
Yes it is rebuildable there is a seal kit for it. It will be taking fluid from the rear reservoir, keep that topped up or you'll loose the back...
I think the 2000 has the wax unit auto choke thing, the 98 has a bar mounted lever. The 2000 has more restrictive headers with cats and o2 sensors...
I was having problems with my temp gauge read out and traced it down to a corroded connector on the left side of the engine so set about trying to...
Since only Ozvfr has answered my plea i assume nobody has a clue to whats happening or im being over cautious , ive decided to forget about it....
Thanks for the reply . Ive soldered an extra earth from the orange block and fixed to the frame. My volts are 13.1 idle 14.2 @ 5k revs lights on...
Been poking around in the garage and noticed when the lights are on and i select the indicators the LCD display dims, brightens,dims, brightens in...
Hello, ive just been for a ride and didnt realised my lights were off, i always ride with em on. My temp gauge read 75 and volt meter 14.5 10...
Separate names with a comma.
