Nope nothing wrong with them. They will switch off after 120m at speeds of less than 31 mph or if on longer than 7 seconds above 31 mph. Lane...
Get a bit of strimmer line and run it down the overflow tube to clear it. Check also the breather tubes.
Me and my mate are fine on the vfr and combined will be about 500lbs. The biggest problem would be being able to get a leg over the bike.
IAM.
It was an interesting read and I wasn’t putting it down, merely making an observation. I have something from the guy at silkolene or somewhere...
Yes but still no comparison as most of the oil questions are semi or fully synthetic not Dino.
Take the black side panel off and have a look. Shine a torch down through the filler will help.
Shame it only compares mineral to fully synthetic and not semi.
None for the new vfr
They are called boot guards https://www.rg-racing.com/browsebike/Honda/VFR800F/2014/EZBG300BL/
R&G do covers for them.
Here you go part number 2....
Eventually ended up putting original screen back on after cutting 10cm off it. No wind noise now. Could maybe have cut a little less off.
Firstly check battery voltage. Using a test lamp, switch ignition on and check for power going into fuse box on every fuse. If no power locate...
New one for me. This is the first posting on 8th gen forkseals leaking that I have read. Try a seal sweep first.
From your picture the light green is connected to the top connector on the horn the other wire is connected via the harness to the horn. The...
Great pic that is exactly what I was trying to describe.
No probs there was an eyelet on some models ,others it was linked in with female bullet type connector. I gather the top connector on the horn (...
The top pic from the bars. The connectors are to the front brake light switch. The add on to that is the feed Honda use for their heated grips.
[ATTACH]
Separate names with a comma.
