Are you thinking that the battery will need replacement because your didn't bring it indoors and onto a tender or because it was dying before you...
I don't know. Something isn't sounding quite right about this. At 10k I am surprised that there are tensioner problems, if there really are. I...
The few set that I had ('84 and '85) did.
Merry Christmas everyone!!
Nice work!! Great classic collection you have! I grabbed the images from your gallery to make them viewable: [IMG] [IMG] [IMG] [IMG] [IMG]...
Good news! I look forward to hearing the results of the compression test now.
After you get the new wheel bolted up tight, be sure to check for bearing play. You can do this by crouching down beside the wheel, grabbing the...
Awesome post Grey! Thanks.
If you have a helper with a 10mm wrench to hold the throttle bodies open and to hold the carbs up it would be pretty simple. Trying to do those...
....and you think that is a bitch, wait till you try to get the throttle cables off and then back on again. And then there is the grand-daddy of...
In addition to the above, I found that grasping the plenum and doing heavy force rocking back and forth in every direction helped. It's a killer...
Yep. Four more bolts, lift up the assembly, carefully remove the clip (don't drop it in there), washer and pin, just like the last page IC posted...
Let's be hopeful that the damaged plug was already damaged when the PO put it in. He did install four different plugs afterall so clearly had no...
While a noble effort, the risk-reward considerations are not favorable to bother splitting the carbs. For every success story like Creaky's there...
I think that there is a good chance that they are reusable.
I believe that the consensus is .13 for both. There is a service bulletin posted here somewhere where Honda specs a looser .13 all around. Keep...
Wow! That hurts. Lesson learned. I used to race very seriously and I often wonder how I would do on one now, almost 20 years later, lol.
...and how did you total the RM250? I've never heard totalled and MX'er together!
Like you I had a parts motor. I took the four heads and took the best parts from them to make the two best possible heads then lapped the valves, etc.
Well, that's a good start! Keep in mind that there could still be dropped valves that aren't hitting the piston and that a look under the valve...
Separate names with a comma.
