The series types do more work when there is an increased load, because they only use what current is needed from the stator (like lights on or...
The charging systems on motorcycles (OEM shunt types) are balanced systems, that is, they are designed with predetermined loads of lights, on...
SH775 made by Shindengen. Available at roadstercycle.com.
Don't know your age, but check out my upgrades and mods for an old geezer (is there any other kind?)
...and cheap too! I used to burnish the contacts on memory modules with a pencil eraser, kind of adapted the idea. Notice the center connector was...
Talked to SpeedMob in Richmond, CA and they said they couldn't get any product for 7 months. They will have a new line next week, stay tuned.
Here is schematic from a 2003, should be same basic circuitry. [IMG] Sounds like you hooked switch to ground instead of coil on relay or coil of...
If you really what to get down to bare metal, try my trick. I use an emery board ( cheap nail sanding board), small size. Peel sandpaper off...
Yes, see my post on: http://vfrworld.com/forums/showthread.php/45623-replacing-with-vfrness-where-is-the-red-white-wire-for-starter-relay
I just replaced my chain and sprockets. To keep from wasting expensive spray and getting it all over sprockets, hubs and rear wheel I got the...
You didn't indicate year of your VFR, but here is what I had to do when I replaced my R/R and hard wired it back to battery. On the output of the...
From all the articles I have read and my own experience, stators generally go bad due to wiring faults, bad connectors or another device. VFR...
http://vfrworld.com/forums/showthread.php/45600-6Th-Gen-VFR-WHY-Do-Stators-Go-Bad-Two-Toasted-In-Two-Weeks From all the articles I have read and...
Found excellent series on stators and systems on another site, seems Honda's aren't the only ones with problems. Also Mercury engines in cigarette...
Great choice in color and year! Mines not ABS, but love it. See my mods.
Currently at $645 a share, don't you wish you had hung on to it?
Yes, removed connector and hard wired stator to R/R, then installed 2 #10 single conductors from R/R back to battery (with inline 30 amp fuse)!
Just changed my sprockets and chain. Used grinder to remove heads of rivets and Cycle Gear chain breaker tool to push out pins. Unfortunately tool...
May sound strange, but if it sat for a long time, it may be jammed with minerals from water getting in. Try injecting some CLR and let it sit.
Pure synthetics, Amsoil or Mobil 1, from lubrication engineer, note "automotive use", no friction modifiers, either in oil or added. [IMG] PS:...
Separate names with a comma.
