Great explanation on stators: http://racetechelectric.com/ft-750-stators.html The short answer: "Stators fail in multiple ways, but are generally...
The VFR is a great bike, but the one weakness is very well known and documented. With low voltage (12volts) and high current systems, connection...
The biggest problem with VFR R&R and Stators are the connectors. Contact resistance due to corrosion and poor contact cause heat and loss of...
Hey, I'm almost 70 and I'm on the VTec on every ride!
Sounds like some wires got switched, do you have a manual that tells you the color code for the wires. Since the indicators are backwards, maybe...
Contact DynoJet, they were very helpful in answering my question. Chris Kelly <ckelly@dynojet.com> Technical support
Not a pretty sight, from the condition of the bike, looks like you may find other problems. It all depends on how serious you are about this...
How old is your chain? I am going to replace chain and sprockets next week because when I adjusted my chain it appeared OK, then I spun rear wheel...
Read this article: http://www.maxmekker.com/MC/Manualer/Honda/NT700V/HISS.pdf [IMG] Clip from article, do you have or can you find key #?
[IMG] This is what I used. Looks the same as yours.
[IMG] Redwood Regional Reserve
I am still trying to figure out whether I did this for the performance or for the challenge of something to do! My main mod beside the lights was...
Forgot to tell you, even though the lower lights are H4's, the high beam filaments are not connected, only two wires going to each socket, from...
Low beams are 2 H4 60/55 and high beams are 2 H7 55w. I have replaced both with LED's and even tried higher wattage lamps (not recommended). Mine...
Years ago I used to take my '83 to the quarter car wash, (power spray) until I tried to get the rear axel out one day. When it finally came out is...
Power Commander recommends the resistors, I did the PAIR Mod and Flapper, I reconnected the flapper because it didn't seem to make any difference....
All the VFRNess does is provide a neat heavy gauge from the output of the R/R back to the battery. I made my own, out of two #10 wires. Wouldn't...
Separate names with a comma.
