Looks like a cable support bracket, the hook is the same as my bracket that supports the cable harness coming off one of the switch assemblies on...
Well on the '83s the shifter will hit the kick stand when you down shift & shift into 1st. [IMG] Here the shifter is at rest [IMG] When pressed...
Just wait till put a new one on the front!
Mine was bent in first years ago, after getting all back together last summer I had problems getting it shift properly.
Thought that was a DAM exhaust, looks ALOT better than stock. Nice touches.
Man of few words!
If you have been working on your carbs, check the connections the coils mounted on carb assembly. I had a fatigued blue wire, causing rpms to...
Have had that problem on my '83, ended up bending shift lever away from frame to get more clearance.
Sorry, I don't have one on either bike, but have seen alot guys have them.
Fan draws a lot of current, normal to have a small voltage drop. Wires are rated to handle the current from the stator, and will not change over...
Copper is an extremely good conductor of electricity and heat. Heat in electrical circuits is caused by resistance, in this case by the...
On my way home on the 1st gen, it hit me that our combined ages was 105!
Try Googling 1992 VF750, there should be lots of pictures of complete bikes that should give a good idea
Ace Hardware has a great assortment of metric bolts, but will rust if not painted (as you can see!) Went to fill up the 1st gen after fixing fuel...
So does the car that is elevated belong to the same owner as the one underneath? If not, how does that work? Missed that in my first post.
A little follow up, decided to fix a few problems with the gas tank last week. Drained it, took it off, fixed problems, put it back on. fill about...
If those are breaker panels on the right wall of top photos, you can not have anything within 3' of the front of the panels, National Electrical...
Vibes not a problem, you do have adjust clutch & rear brake+brake light.
You are on the road by now, have a safe trip and watch the holiday drivers, they are worse than the Sunday drivers. Ah, to be young again. Some...
I used a couple of deep sockets to loosen and restart caps by hand, they have ample gripping area. Also, used 1 1/2' PVC pipe trimmed square on a...
Separate names with a comma.