Yeah this clown PM'ed me also. Mods, could you delete this clown's account for us, por favor?
I'll try and scan a copy of the schematic, that seems to be the only way to piece it out to post on here. Yeah, I didn't investigate too much...
Well, from what Squamish said this tap might be as good as any other, I would just be looking for something way off normal, be it high or low....
Alright, finally got it in the mail last night and I got bored so I decided to look at the '86 750 schematic in the back of the manual and do a...
That looks like a sweet setup, what year did he get those from? Maybe if you experiment with baffles or drilling holes in a plate in a 4-2-1 you...
Front running lights should be on when the ignition key is turned and when the bike is running. Could be a problem possibly with the signal relay?...
And how do come to that statement onedark? Carbs ain't rocket science man.
Some people have used the vinegar method with success, plus with vinegar disposal is not a big issue.
Yeah, the stock mirrors on my '86 750 are probably the same as the ones on the '87. They do suck, I'll probably go with something newer myself...
I'm pretty open to what will work best, switch or relay or just tapping into a circuit that only turns on with the ignition. I wasn't sure if...
I'll throw my name in the hat if you two don't want it.
That setup looks nice.
Sounds like what I'll want to do, throw a SPST switch directly to the battery in there when I get it and call it good. Thanks guys, Ryan
He, that was the advice I gave to someone else on the SOHC forum, guys there recommended hooking it up to the ignition switch wires in the...
Unfortunately this is all stuff you could have done yourself for about $400 in parts on the high end. Cleaning the carbs and the clutch plates...
Hey guys, Just purchased a small voltmeter I plan on installing either on the inner fairing panels or at the instrument cluster on my '86...
Yes, the dreaded Feebay snipe.
Any recommendations on what I should use to etch and get the rust out of an '86 VFR750F fuel tank. I just scored one on feebay and the rust is...
About the same as Cyborg on my Gen 2, I'll run about 40psi front and about 45 rear- manual says 36psiFr and 42 rear above 200 lbs. load. (I am a...
Yeah, the VFR400 quickly comes to mind.
Separate names with a comma.
