How are you supposed to adjust the pilot screws when the carbs are attached and the filter box is on?? This would seem to be an impossible task...
Good to hear the bike is treating you well. The synch screws are attatched to the throttle linkanges poiting down to the V when you look under...
I think the 106hp on a stocker has been debunked way long ago, hasn't it? I think the true number is closer to 80hp.
Plug chop will tell if you are running rich.
That sounds about right, seems like I average about 35 or 36 mpg on my 86 750.
I would only recommend running Seafoam in your oil on an oil flush, you can run it in your gas every now and then to give the carbs a little cleaning.
Keep the tank clean and full if you put it away for a couple of weeks or more and use a stabilizing fluid such as Stabil. Run gas that you know is...
I think I found the tool you are talking about: UNIVERSAL VALVE ADJUSTMENT TOOL 10mm #88950 It looks a little long to fit the intake tappets...
Not sure but if you don't need your center stand to mount that exhaust on , I'll gladly take it off your hands.
If I understand right you can synch them without a manometer or dials by using a tachometer with 50rpm or less accuracy. But I would think the...
Anyone know where to buy longer than normal tappet wrenches for the next time I have to adjust the tappets on my 86 750? Adjusting with a...
Good luck. Finally got to synching my carbs last night and it seems that my Morgan did not have enough vacuum to really do the job, carb 1 was...
Call up Cometic, they could probably fab one up for you.
You'll probably wear out those EBC pads quicker than you would the Honda pads. Give up some extra grip for overall life, depends on what you want...
It should, looks like someone cut out some extra holes on that one, you should be able to plug those holes though. You'll run a little lean if...
You can download a manual on the forum here, but basically what you do is pull the fuel pump electrical red plug and the yellow green relay wire...
Looks nice, I'm waiting for the full package from Chuck. So Airtech makes theirs out of ABS plastic?
Cooper Mini's come supercharged out of the box.
OK, the service manual is pretty nebulous on what to adjust for synchronization. "Synchronize to specification by turning the adjusting screws...
The glycol Motion Pro is crap, it is meant for smaller bikes, I had it suck the fluid out on my CB. I ordered a Morgan carbtune so carb synchro is...
Separate names with a comma.
