Uh yeah, you should have practically zero cam wear unless a PO adjusted the valves wrong or didn't do it at all.
mstakern: you might have to rebuild the master cylinder if you can't build up any pressure at all and you bled it with a vacuum pump.
Wowsers RC, how much were you selling yours for?
All cu$$$tom $$$tuff.
Yeeouch, and no tail cowl cover to boot. AND it is missing the sweet extra 50cc's of chocolatey goodness. :crazy: You might want to rename the...
I assume you set the float height a little lower to lean it out?
Ruroh, doesn't sound good slow.
I would check the usual culprits, fuse, short, bad ground, get a continuity tester and run it down the harness to see if you have a short...
Center stand? Good carbs?
http://www.siriusconinc.com/pro-detail.php?pid=&product_id=2795
I am sure if you called or emailed Cometic they could scare up the old pattern for you. That would be the best choice.
Yeah, that was going to be my final recommendation if you didn't want to DIY, just take it into a radiator shop and have them futz with it.
No kidding these bikes regularly get 100K+ on regular moto dino oil, ANY synthetic with an MA rating would improve on that.
Sorry Lazy, this coming from a Royal Purple People Eater person makes me not believe it. If you want to really test your theory send samples from...
Sorry to hear about that Lazy, I am probably in the same boat on my cooling system with the donor engine bike I am resurrecting but the fan won't...
Not tough at all, drain gas from the tank, remove four nuts at the sensor, I would replace the oring while you are in there and swap it out. Easy...
2nd gen, it will be worth the wait.
Is this a project bike (meaning you have other bikes to ride) or do you plan on this being a primary rider (only bike)? If the answer is the...
What were you using to measure your temps if you don't mind me asking?
I don't know, I am wondering if they sent me the wrong gaskets.
Separate names with a comma.
