And where is the fun in that?
Think about hooking 2 of them up with a crossover switch so if one goes bad just flick the switch and keep going and replace the bad one at your...
[only fun people allowed to attend--angry ones with attitude stay home] Well I'm not gunna come then
-36C I can't get my head around that, man could die out there in those conditions, we had +36 a couple of days ago. I can never understand why...
AGM is the only way to go
Molasses will strip all the rust out, takes a while but it will get it out and then do a tank liner like POR15 or similar,takes time but not a lot...
My guess master cylinder overfilled and not enough room for the fluid from the slave to return back to the master cylinder, can't figure any other...
As the OP asked the question over a month ago, I guess he has either fixed it or it burnt to the ground
My belief is it is still in a million bits in some corner and eventually will be thrown out, this is only a small bit of the chaos that went on at...
Ok so does anybody know if poor old Gavin ever got to take his first ride?
I have ground my own shims in a pedestal drill, a speaker magnet fitted into the chuck to hold the shim and a sheet of wet and dry paper on the...
I have never heard of a blocked return hole on a clutch causing this problem because the clutch springs have plenty of power to force the fluid...
You don't need to open up the slave, just unbolt it , but if you do unbolt it don't pull the clutch lever in because then you will be rebuilding...
Last time I went to a Honda dealership, probably 4 years ago, I needed an oil filter for my CB, they gouged me $25 for the filter, I said the the...
Ok 2 different problems here fluid problems will not cause the clutch to slip,it will cause the reverse, clutch won't lift the plates. Put it in...
You are just another one of the constant flow of people with charging problems, you will have to do the drill, it is here somewhere. Check the...
Grey this wouldn't account for the fact it fires up ok with a cloth over the front carbs. It is obviously a carby problem
Just tell him you will release the article one month after payment is recieved
Whenever I go to a dealership I wear my old work clothes and nobody bothers me so I can look around with ease, I wouldn't buy new ever again but...
Sorry to hear about you loss, always a fear of getting rear ended, infact I have gone out of my way not to turn in that situation keep going till...
Separate names with a comma.
