If you're mechanically inclined, follow the manual and all will be good. Take pics and remember where stuff goes and it's not that hard on any...
The JB Weld stuff is too runny for my liking and not as strong.
About to tackle this myself, have OEM thermostat and a set of AES silicone hoses. Valve check will be done also.
Permatex Plastic Epoxy. Tough, sandable, paintable.
This was at the Toronto Motorcycle show a coupla weeks ago...... part of club's exhibition. [IMG]
I commuted once in a previous life, nearly got killed a couple of times...... very happy to be retarded, er, retired now. Be careful out there.
Handlebar risers, perhaps Convertibars will give you a lot of adjustment to reduce that forward lean, but you will still have some lean... it's a...
It's actually a provincial thing.... depends on what risk area you're in, what you're insuring, e.g., an FZ1 by itself will cost me $1800/yr. a...
What Terry says..... 20 minutes? He's good. Easy enough, but maybe there's someone near who can help, where are you located?
With a new-to-me bike I change the spark plugs, don't know condition or mileage of what's in there. Time for new ones. I'd next do an adjustment...
Easy for him........ he's not from BC or Ontario!
Lift the cover and take a pic.... is it a coax power outlet perhaps?
OK, 7k miles.. won't be much history. That would rule out the valve check IMHO for many miles later, but check the air box/filter. Plugs MAY be...
I am not quite understanding... you want VTR lowers and VTR cartridges with VFR tubes... why not swap out the entire fork and you have it all, no...
+1 on what Greg says... do the easy stuff first, fresh plugs and air filter..... see if it improves. Sounds like the fuel you're using is OK....
The net looks like a generic bungie net. Is the last part rubberish... perhaps a shield to keep splash off the rear shock?
You don't need that! Just send it to me and I'll take care of it.....:)
FYI, was in a Honda dealer today... many of the dirt bikes had those long bolts, probably 6mm thread size, but don't know... 90116-KZZ-900 ($1.67...
That Moose thing is covering an SAE connector... your second pic has the label for an Optimate battery charger..... so it should be connected to...
Separate names with a comma.
