DIY motorcycle lift [MEDIA]
Had to chuckle.... just where would an American find a Robertson screw, lol....
For cold, I don't see a lot wrong with those numbers.... any cylinder is bound to rise with oil...... what you should do is check it again with...
Yes, I did have to put load resistors on the signals. I tried to find an LED compatable flasher, but no go for the unique OEM connector..... The...
Gen5 - I installed Superbright LED's in the turn signals, which also are running lights. Bought clearer yellow lenses from China for U$25 (you...
I'd also think mostly for water dispersion, although we should always have them on right way around..... let the mechanic know but ride it until...
Sick, straycat, just sick!
I'd like to see the VFR800X continued and brought to North America..... I think they'd sell.
Not a Two Brothers fan, Delkevic is a tad tamer and better sound to me.
I'd put the bike on the side stand before filling or topping up, so right rad is highest point. Pour the coolant in slowly so not to trap air,...
For sat nav, I prefer an always on connection.... don't know what 8th Gen has for fuses, but a fuse tap into an existing fuse can work. Sat nav...
Bad gas is usually just some accumulated water, to rule it out, just add a couple of ounces of Seafoam. The isopropanol in it disperses the water.
PR4 is Pilot Road 4
The tire pressure recommendation is for the original OEM tires, which may have stiff sidewalls (e.g., Bridgestones). IMHO 36 psi is marginally...
Aside from it maybe being normal, get the back wheel off the ground, put it in various gears and rotate the wheel back and forth. Are the rear...
You've likely got an electrical gremlin (corroded connection) somewhere that is intermittent. Just because the previous owner didn't have issues,...
[MEDIA]
I ran a car tire on my FJR for over 40k miles.... it stuck like glue and you could do anything. However, each to his own, and I am back to m/c...
Listen to the Captain... no fluid splashback is an indication that m/c needs a cleaning. The hood just prevents backsplash as you bleed. As...
Good idea to isolate from heat source, but your reservoir is likely overfilled. +1 on checking the bleed hole while you're in there.
Separate names with a comma.
