I have an old Allied MAC tach/dwell meter my Dad gave me, Squirrel is right, you will want a four chamber vacuum reader like a Morgan Carbtune. I...
A Harbor Freight cheapy multimeter is more than adequate for the task at hand, a Fluke is way overkill for this kind of application. You do not...
I just hope this isn't your only bike and you want it running soon. Don't want you getting your hopes up to be let down.
A fool and his money...:whistle:
Motion Pro sells a puller for $US8.99 at Motion Pro - Flywheel Puller, M22X1.5 R.H. External Thread Used in conjunction with a strap wrench...
I picked up a folding steel ramp for about $60 at the local Feldman's, it works great with my truck.
Nylon washer is highly recommended, I didn't put one on my shiny new one and it went poof- into thin air.
Rent a pickup truck, get a ramp, strap it down in back and drive it back yourself. I drove my pickup truck each time to pick up my bikes- make it...
You should be able to snake some line in there with a hand pump to get that extra bit out and then throw some two cycle oil in there and slosh...
Has anyone tried this at all? Pics? I wouldn't mind trying it it does not require too much modifications of my #2 86.
Or an extra scooter! Enjoy the extra hp!
If you can pull them yourself you can probably clean them better than a shop would, just use carb cleaner spray and blow out all orifices with an...
Meh, just get the K&L's and stop trying to make a circle fit in a square peg.
Get the Honda gaskets like Toe said but I have to agree with him, move up to at least a gen2 if you want less problems to deal with. Unless you...
I had no idea they made carburetors in 1866. I learn new stuff every day.
See if you can get the engine to move with the bike in a high gear pushing it along the ground to see if it is seized. Another thing to try is to...
Sure, it could happen, could be a crack in the block too until you find out.
No, are you sure it is for a 2nd gen? You might have to install some length adapters like Fatso said to get it to clear the shock linkage.
I think you will need a 12 and 14mm allen for the two swingarm bolts.
Teflon tape like rpierce stated and clean the threads, the best fluid to use for these brake systems is DOT4.
Separate names with a comma.
