I had the same problem...disconnect every thing...check the routing and check especially the return cable adjustment on the carb bodies..this is...
oil change is pretty straight forward. Try to warm the bike center the bike on center-stand, remove cowl, plastic cover. Remove oil drain bolt...
Anyone know how to install frame sliders on a 3rd gen? I dont believe the sliders are completely frame and model specific provided the bolt is...
Sounds suspiciously like my gov?
btw...dont use low end fram filters they are garbage!!!
synthetic... walmart synthetic is good and cheap apparently made by pennzoil
Does anyone have a diy to test the Temp sensor or temp sensor circuit? I had the bike idle for over 30 min and the gauge did not move or fan did...
What was your first bike? What was /is your favorite bike? ( can be a non vfr) What was your most reliable bike?
is that a pitbull in your avatar? I love pitbull's!!! My guy is 17 years old !!! BTW...I am a computer security expert for the government here....
ok...so after several days of not having an idea of what i was doing....and with no fear of ruining the bike....I painstakingly cleaned the carbs...
crustyrider...thank you Can you tell me some more info....so the gauges are connected to the screws in the manifold...then the slotted screw on...
Its different here...I will get you the part number here. 87-97 may be the same but 84-97 certainly is not I have looked at it my self. They are...
I put the new casing in and my bike fired up just fine.
Squirrel, ...Actually its not.The Manual refers to.. the Common Service Manual but I can't make out any pics in the Common Service Manual....
Can Someone tell me where to connect the carb sync gauges on an 1991 vfr 750f? Also what the procedure is to do a carb sync would help...
I dowloaded a copy of the manual from VFR Discussion just now and will go through it.
sorry but what do you mean by what numbers are on the idle jets? I guess the numbers i gave you were the main jets...please explain a bit...
arent the slide needles connected to the vacuum piston?
the number on the jets are 124 and the ones i put in is 120. Should I put the #124 jets back in then? no, the bike didnt run properly since i...
ok is there a trick to getting them apart? the stock needles are quite a bit different. BTW...the kit is called Dynojet..distributed by...
Separate names with a comma.
