Yep & a CBR600F4+i (99-04) master cylinder is just the right size on the front & some people have just kept the VFR one & get a little more lever...
Here's how to do the calipers so that only one hose is required per caliper. You need a bolt to blank off the secondary hose connections & a pair...
Sounds like you have a leak in the system, or as another poster suggests a failed radiator cap. Take both side fairing off & fill the system with...
Have you kept the CBS ? if not have you looked at an MX combined reservoir & master cylinder ? Something like CRF 250/450 have ?
There is a reason that there is a heat shield between the brake master cylinder & the exhaust pipe ! The brake actuator link may work, but where...
I've now managed to find the bearing sizes & the Ducati shaft is only 35mm OD verses the VFR/RVF400/800 which is 40mm OD, so the Ducati part won't...
Hi All, Does anyone know if a Ducati 748/916/996 rear sprocket cush drive will fit on the splines of a VFR/RVF400 axle ? Thanks Chris W.
Has anyone removed the anti-lash gears on the camshaft gear wheels on a 5th gen ? Was there any noticeable change in engine output (measured on...
Be interested to see how it comes out. Also was interesting to see the dyno figures from the mag. My Euro spec 1986 model made 59rwhp about 2001...
The man said without revving the nuts off it. -1 at the front OR +2 or +3 at the rear will achieve the desired result. Both would mean VERY low...
Keep up the good work. I'll soon be adding Phase-2 & possibly Phase-3 write up for my 5th Gen :) Loved my VF500, sold to a friend, who has left...
An alternate solution for 6th Gen ! Well having browsed some parts files & had a look at what's available, a simple upgrade for 6th gens (43mm...
Well I don't know how you ride yours, but my 5th gen can smoke any 600 I've come up against, at least in a drag race ! The figures below were...
Hi All, anyone got a Honda F4/F4i thast they can try a fender swap on to a 5th gen ? I'm having trouble finding a carbon front fender, so had...
Found the info for RC45, as follows;- Inlet & Exhaust head diameter = in 29 - ex 24.5 (Looks like the head won't take anything bigger !)...
If you are going to pay for a custom dyno map, then why not get the AutoTune ? simple addon, turn on & go. As someone else found out to their...
All 5th & 6th Gen's have the same Bore & Stroke, the head (nor any other parts) are NOT taken in to consideration when sizing an engine, the...
Thanks Toe Cutter, that was pretty much where I ended up ! I'm fairly sure they are the same size as the RC45, as the heads are stright swaps,...
Hi All, Does anyone know the VFR800Fi Valves dimensions ? Don't seem to come up readily. I assume they are the same as the RC45, but again I...
What wheel are you using with that ? I assume its a car wheel or Ducati, I wouldn't want either !
Separate names with a comma.
