These aren't cheap options, but give you the rearward placement you need. Helibars claim 1.25" up and 1.5" rearward, keeping stock cables/lines....
Make yourself a squeegie from a plastic body filler applicator and wrap one edge with wide female velcro (the soft side).
Perhaps to help you along with your decision.......... [ATTACH] I used Superbright LED's in mine, green for backlighting, amber for turn...
Randy's been working on his May Two-Four a bit early methinks.......... what shape will you be in next Tuesday, bro?
Look on lower cowl diagram.... I think the stay should have a wire bracket on it, item 5?????? Acts as a clip for the white part of the adjuster.
One tooth off shouldn't destroy valves, and it wouldn't run that smooth. Get your cam timing corrected and try again.....
Agree, address the ground block and the main ground on the frame. Check connections to the items, including vacuum hoses. Clear the codes, start...
Very nice..... the yellow ones are the fastest!!
I would check a few things...... assuming caliper pistons are clean and not sticking Clips at forward end of pads are in good shape so pads have...
Iff'n it were me, I'd keep the gold wheels to go with the gold stripes......
Pretty sure he's gonna be installing a mirrored ball and listening to Disco real soon! Then we'll get dazzling pictures........
Noice!!
You mean the lever sound? There is a brass bushing in the lever which can get scored and oval. Take the lever off and inspect, replace if...
The risk is very low these days. As long as there is enough fuel to pump, it will be adequately cooled. Fuel is drawn through the filter and the...
TECHNICAL SPECIFICATIONS OF PIPE 1. All pipe is to be made of a long hole, surrounded by metal centered around the hole. 2. All pipe is to be...
Honda typically has a thicker pad on the rear, but the fitment is the same...... thus two part numbers. Look up aftermarket, EBC for example and...
Obviously one must take care of a battery properly. The OEM Yuasa battery lasts the longest, should be the GS series made in their Taiwan...
1/2 litre isn't terrible, but how much is too much..... keep in mind the minute you start the engine, the oil level drops significantly as oil is...
I haven't seen one of these either. Looks like it shares some Nighthawk parts. Wondering if it has the hydraulic lifters. I have this feeling...
Have you checked the accuracy of the voltmeter against a known good one? Are all the R/R connections clean and good? Have you tested the voltage...
Separate names with a comma.
