Are you refering to the Scottoiler Vacuum system? Temperature variables do seem to be a concern with constant flow oilers. I've heard some people...
Yes, 100% true because I said the Scottoiler Vacuum system. It's also called the vSystem. The V is for vacuum. It runs $130 for the single ended...
Okay, so it looks like the Scottoiler Vacuum, Tutoro Auto and the Loobman all use gravity feed systems to move the oil down a hose to the...
Well, 90w oil doesn't pour very quickly. It's hard to justify spending $165 on something that adds a little oil to the chain. Does the...
I see the Loobman has a very crude way it applies oil to the sprocket. I might just buy the Scottoiler Dual Injector for $35 and not run a...
Keep in mind that the fuel pump only receives power when the engine is running. There is a rectagular block box next to it that recieves a signal...
Those 360* cranks just don't sound good to me. 180* for life!!! :triumphant:
No speed bump needed. I chose the setting with the least brake dive. Works pretty good, but no substitute for stiffer springs. Glad you got it...
Nice, but is the vacuum design needed? I was thinking of the Loobman. You just give the bottle a light squeeze to move the oil into the tube and...
It looks like the top of your upper tree is nice and flat. You might be able to drill holes and install a set of handle bar mounts. I got some...
Even if the carbs were totally junked and out of gas, it should still run by spraying carb cleaner in the throats while cranking it over. It...
With police handlbars and front end swapped, old mirrors
I did a front end swap on my 1986 VFR700 and I'm selling the parts. In particular the aftermarket fork brace. I know they are rare and hard to...
I added some restriction to the exhaust and now at a steady 5500 or so I can give it half throttle and it has power. It takes off, but if I give...
Okay, so out of curiosity I set the pilot screws to 1.5 turns out. It ran okay, but you could tell the bottom half of the rpm range was kinda weak...
I've tried my pilot screws at 3 turns out and it rode pretty good, but had a habit of not returning to idle nice and quick. It had a lag after a...
Ridervfr, you mentioned the thermostat, not a "skippy" person. Are you calling yourself that? That's confusing. (2nd gen bikes have easy access...
Why? You make no sense. Bench sync only needs to be done once to get bike running. If you have to keep pulling carbs off, your not cleaning them...
My Virago 700 was 3 turns out, too, but those are completely different engines, carbs, etc... so I don't think we can compare them to the V4. Now...
Separate names with a comma.
