One more thing, is the cap vent only one way? The tank needs to let air out to reduce pressure as the fuel expands as well as let air in to...
Yeah, I'm familiar with the tank internals on my 86 and I've seen pictures of these tanks cut open. Your talking about the 86/87 bikes, right?...
The overflow tube under the cap just to the side that drains down to the ground? I don't think that would have any effect on the bike running,...
Are these cans welded onto the piping? The mufflers look like they may be tricky to replace with slip-ons.
I've got some just like that. The PO fabbed up some thin aluminum plates to fit on the back side to squeeze the fairing and hold them nicely in...
I'm glad you got it fixed. I just wanted to mention that when the fuel tank level is low, below petcock level, the pump has to pull a vacuum...
Do you mean inside the actual flip cap? I think the tank vent is built inside the cap. Usually when it gets clogged you'll be cruising along and...
Does you setup look like mine with the short can behind the foot pegs or do you have the yoshimira with the longer can that has a mounting strap...
An update: I got a qoute from a local motorcycle exhaust shop here in Houston to reuse the stock collectors on each side and fabricate a 2 to 1...
Fuel Gauge The 86/87 bikes only had the fuel low light sensor that made a light come on. The 88/89 bikes did not have this, instead they had a...
I'd like to swap in a 90-97 VFR dash on my 86 bike, so I did a bit of research. Here is the 86-87 regular style: [IMG] Here is the 86-87 F2...
Holy cow, your right. I always though they were installed permanently at the factory as a security device, but I do see they are sold separately....
Bummer. How would you source a new plate? Buy a frame and cut it off? Sounds expensive. Maybe scour a bike salvage yard for a a similar looking...
I need the same part. It seems my seat was recovered and these chrome mounts were removed. See pic below. Does anyone have any idea where to get...
Shine a light on the steering lock pin and see if the bars are turning far enough. You can use a die grinder on the steel locking ring attached to...
I purposefully don't use the stock mounts as they tend to break large chunks of fairing off in a fall. A curved piece of metal that can bend and...
Okay, now I understand what you mean. You can have the standard pattern if you use the stock shift arm or a reverse pattern if you use the F2...
Hey Tim, I just recieved my F2 shifter assemby from ebay ($18 total and in good condition :eagerness:), but there is no way the shift rod is going...
Supertrapps are very expensive, so are not an option. The supertrapps were unique in that they were the only dual setup that didn't use chambered...
I kmow both setups sound good, but does anyone know if the there is a difference in sound volume? I know on a car that single pipes are quieter...
Separate names with a comma.
