Oh yes, Rene asked about hazard lights. I will try and explain. The hazard light switch itself is pretty simple. You have 3 wires, a gray power...
Sorry to bring up such an old thread, but for those interested the "side lights" are the same as "position lights" and contrary to the name do not...
I cropped the edges as well as tweaked the contrast and made the colors a bit bolder. [IMG]
Just copy the "IMG" link from the photobucket page and paste it here in the forum and the image will show up. Many thanks lawtalkingdude. That's...
No problem. The exhaust change is pretty darn interesting. The 86/87 connects diagonal cylinders. Front left to right rear and front right to...
The profile of the left needle looks correct. Dynojet made a kit with new needles that had the adjustable C clips, but the consensus was the...
Every part of the 88-89 exhausts are different than the 86-87. I believe it's best to pull the rear wheel and shock out, then remove the heat...
All of the panels on these bikes are repairable. It's just plastic, if you know what your doing, you can do anything. The back of my tail broke...
He is incorrect about how the needle and main jets work at 6:30. As the tapered needle moves up and down the small gap around the hole it goes...
I'd definetly go bigger on the main jets. Maybe 2 jet sizes or more. If you have 118's then shoot for around 122-124. If you choose to drill, the...
Once you get the slides out, go to the hardware store and look through the smallest stainless steel flat washers. The ID needs to be big enough to...
The Haynes manual doesn't appear to be online. I also did a lot of searching just for the wiring diagrams. I'm sure your diagram would be...
I'm going to suggest you start a new thread in this section so we can discuss your bike specifically. Then we can get into all the details with you.
Nah, people have GSXR front ends on these bikes as well. Remember that all front ends have the same basic parts. The only custom parts you might...
I have a Kawasaki ZX7 front end so I could brobably help. What year ZX9 do you have? Have you measured the fork lengths, yet? Have you measured...
I've Looked everywhere for a wiring schematic and every one I find is for the non-American bikes. Those bikes have Position lights while the US...
I did a check and they have 2 of these rubber pieces left in stock. $10ea. Verify the part number #64101-MB2-000. This is for an 83 VF700F....
I actually did find this part for my bike. David Silver Spares US had a few in stock. You should get the part number and check their website. I...
Angel, are you still on this forum? Can you give some more details and pictures of your bike? I like the custom seat as it seems more practical...
Those prices are ridiculous. If you have a hydraulic repair shop near you they will practically give you some.
Separate names with a comma.
