Someone should put together a picture array of all the different needles so we can identify what jet kit has been installed.
Assuming the original o-rings are missing and not hiding in the holes, this kit should work just fine. So if the delivery time is not a factor,...
Well, it might be of some help to the next guy. :) I'm not as familiar with the VF750's as my bike is the next generation. The bigger front...
I'm hoping my 0.010" wire will clean out the deceleration enrichment vacuum jet. That tiny hole that the diaphragm indexes to. My 0.015" wire is...
I just got back from a music store and they carried strings down to 0.007" as well as 0.008", 0.009" and the 0.010" (0.25mm) that I bought as it...
I don't think the brand of sprockets is a big deal unless your converting to a 520 chain. All fronts are steel and I would recommend the stock...
Wow, my 86 doesn't seem to have these wires. It just has the short heavy wire from the battery to a bolt on the frame. See pic.
I'm riding right now! :) I just dropped a K&N filter (I got for $26) into the bike and I'm out testing the top end of the rpm range. So far, no...
Definetly not. Opening it while hot is like opening a hot rad cap. It will blow hot water all over you. When it's cold, open it up and see if...
I was searching for pics of needles and ran across this post. I also have ones like on the right side in your picture. So when you recieved your...
Oh yeah, I suppose the slides could have been drilled out as well. Does anyone know what size hole the stock slides should have or what size...
Let me provide some more background. The bike has run well for the 3 years I've had it except for having a slight weak spot around 5500 rpm on the...
What was the verdict? Did the stage 1 fix it?
Dynojet, huh? I was hunting for pictures, but came up dry. I knew something was up with this bike as the airbox lid has like thirty 1/2" holes...
I missed this 3 years ago when I first cleaned these carbs, maybe they weren't worn then? The tip of the needle is worn now. I assumed these...
The floating at 3K rpm may be related to lack of o-rings on pilot jet screws. Under deceleration air could be getting sucked into the carb. Could...
I just realized I should at least post up my new exhaust. I rotated the muffler 1/3 a turn to hide the scratched up section and you don't even...
Robvg, I read the majority of this thread and didn't see any mention of the fuel pump relay. Assuming that the VF700 bikes have a similar electric...
Note that I changed post 18 to the correct drill bit sizes. The bit to hole size was a bit confusing. I found another chart that list precision...
So you had to get a slightly smaller o-ring? What model 86 bike was this, a VFR750? I've noticed that when these o-rings get wet with fuel they...
Separate names with a comma.
