Well, were narrowing it down. It's important that the filter has a good seal. You might adress that issue in the future and see it has any effect....
I think you misunderstood. When he used the sponge, he was demonstrating a theory that a lot of people believe. Then he showed how the extra...
Cool. Well it looks like your exhaust is fine. Your weak midrange is probably in the carb or the intake tract. Have you looked at your airbox...
Here's a picture of someone doing it without the center punch. My chain rivets were hardened steel and I don't think a ball peen hammer by itself...
I hate to break it to you, but a C-clamp isn't gonna do squat to flare the rivet link. If you have no means to get a rivet tool today, there...
So the replacement mufflers look stock and not opened up to flow more? Have you ever had the carbs off for a good cleaning and inspection? I'm...
Check these vids: http://www.youtube.com/watch?v=kJJV5DHb95E&feature=youtube_gdata_player...
Just a side note. I found a great diagram of a downdraft CV carb at howmotorcycleswork.com. It's not exactly like the Keihin VD series, but it's...
I've read that the brass and aluminum are pretty close in hardness which is why they both tend to wear as opposed to only one or the other...
These carbs do not have replacable needle jets. FactoryPro doesn't have anything to fix this. Okay, I think your assuming the Keihin VD carbs...
Why would you assume the slide guides are worn? They are fine, no flop. I can pick up another Dynojet stage 1 for $90. Maybe less if Dynojet...
The part that wears isn't the emulsion tube as they are easily removable. The part your refering to is the needle jet. That is the non removable...
I'm wondering about those other ground wires. Maybe mine were lost by previous owner?
I was just using laymans terms. By "stretch" I mean lengthen. I included a picture below that shows the wear that causes a chain to lengthen....
No point, just facts. They are still making a profit. When you subtract shipping costs and profit, Caltric might have $1 per pad in costs. The...
6 Pads for $15 and free shipping? If you only put them on the rear, sure. When it comes to front pads, it's your life at stake. Even in normal...
Yeah, you've got an issue all right. It should pull strong from 3k on up with no dip. The first and easiest thing to check is the exhaust. A dip...
Wow, that's a big range. The 86-89 VFR's don't have that much room. 15 to maybe 17 I think. So you seem good in that area. My 86 makes okay power...
Not quite. Keihin takes the hole diameter and also factors in the flow rate because of the way the holes are tapered I think. The smaller jets may...
I was half thinking of asking to ride over to check it out if you were around Houston. Ah well. I think the Miura's are more sophisticated...
Separate names with a comma.
