On my 08 there was an "adapter" between the harness and the bulb. I had already bought good ceramic h4 pitails so I soldered them in place. (stock...
I wanted to have the lights off until after engine start so I put in 2 h4 relay kits from Newbonneville.com that i ran jumpers from the H7 highs...
Just a thought, mine did something similar when the chain was a little too loose.
I didn't think of looking for cut wires. The wrap seemed factory. Don't know how the running lifgts would work, unless... The 3rd wire was tapped...
I'll have to do some tracing with a meter next time I'm home. I'm more than 1/2 way across the states for a few more weeks.
First thing I did when I bought the bike, I'm 2nd owner. The manual does show 3 wires but mines 2 wires all the way round. Maybe a canadian...
I'm sorry, details like that are kinda important. It's an 08 non ABS. 7440 single filiments at all 4 corners but does run position lights in...
Sorry, nope. Marker lights light, blinkers blink and only 2 wires. Bulbs are 7440 single filiments. I did read a post somewhere here that it does...
I'm beginning to think that because my front markers/turns are 2 wire opposed to 3 and the flasher is 2 wire that the low voltage mode, ie: marker...
Been researching issues I'm having and everywhere says 3 wire turn relay, 3 wire front lights. Even my manual. My 08 has 2 wire relay and 2 wire...
You mentioned Europe spec position lights. Are they separate bulbs in the headlight housing?
I'm using the H4 HI filiments wired from the H7 wires as I have relayed H7 HIDS up top and a separate switch to activate the (works on hibeam on...
Agreed on exercise however there's not much you can do as a full time OTR driver. Keeps me a pretty tight schedule. Big down side is going home...
Today was a wake up call about how in shape you really have to be to do 5 plus hours on the bike. I drive a truck 11hours a night 6 nights a week...
Ebay works and good prices. There's discussion about Barnett vs EBC but IMHO Barnett wins for progressive feel.
Fuelmotousa.com. they will customize the map to what you have. Tell them everything, K&N filter" 2 Bros, snorkel ect. The difference is incredible.
Thanls, its strange changing the flasher made no difference at all. Resisters next. Honda wiring is a PITB.
It's expensive but the PC5 is the single most effective mod that you can make. Id bet my mapped 800 against any of my90's race bikes.
I LOVE it. Smooth sailing. Seriously,45 minutes and done. The springs make the difference.
Yep, Honda saw fit to use H4 in the bottom without wiring for highbeam filiment. I'm using HID H7 up top but ran a jumper to the H4 high filiment...
Separate names with a comma.
