True. But are these nonstainless pistons a new thing or has this been an issue on previous vfrs as well? Sent from my Nexus 6 using Tapatalk
I am sure there is a big difference between 3000km at the track and 3000km commuting. If those 3000km were spent at 15,000 RPMs, sure, throw away...
This is unbelievable that anything on an 8th gen is failing already. Here I was thinking, "finally got rid of that linked crap and fitted radials"...
You don't like candy red? [IMG]
Is that real carbon? It looks great! Where did you get the hugger from?
It is not that manufactures leave very little on the table (modern liter bikes are making huge +15whp gains from simple ecu flashes these days),...
KN for someone that wants to buy a filter and reuse it forever and doesnt care about power. Pipercross for someone that wants to buy a filter, for...
Also while you're in there, be sure to check the rr to stator connector terminals. Those are a big failure point and like to burn up. Most people...
Lucky you. Rick's rr and OEM stator? Sent from my Nexus 6 using Tapatalk
Yeah I had a few materials and solidworks classes that required FEM analysis. Really cool stuff. I could see the K&N air filter, with it's small...
Sounds like a hot short of some kind. Either the rectifier or a phase on the stator. You said you replaced the rectifier and stator, but you...
OUCHHHHHHHHHH Good eye!
"These test were run on 108 Octane Sunoco "pump" race gas on a DJ 250 and were made without any third party fuel management system (i.e. PC111...
On Tapatalk it's a <3 Sent from my Nexus 6 using Tapatalk
-10 pts for VTEC(h)
On an otherwise stock VFR800, I am sure the oem filter is fine, but if you were to have a VFR800 with a race header, slip-on, snorkel/flapper...
My two brothers slip-on wouldn't slip over the outlet of the Two Brothers header, but the slip-on piping was the same diameter as the two brothers...
Yes the rapid bike evo and racing modules will work on the 1998/1999's. The self tuning is not mandatory. You can use it with the supplied...
Funny, my fifteen plus year old two brothers header is doing great, makes the same torque in the 3000-8000 range and has huge a top end gain from...
This is where its at: http://www.vfrdiscussion.com/index.php?/forums/topic/78376-aftermarket-pipes-for-gen-8/&page=22
Separate names with a comma.
