Hi, I bought LEDs from ebay, just checked compatibility and picked no brand ones in blue. However, I never installed LEDs for oil, fi, neutral,...
Hi, Bike is very dirty, did not have time to wash it. Would not show work and effort put into this bike when dirty. I will try to wash it over the...
Right, this is all. I did not upload all pictures, no point and it is also painful not to be able to upload more than 1 picture at once here :(....
Special thanks to Eoghan ( Solid Works and other design jobs, including mechanical jobs ) and Peter ( for assisting me with most difficult...
You need quite a big washer for the left fork where the lower brake bracket mount is. You have a metal tubing inside that mount and it needs a big...
"Paint" peeling of the calipers is not really paint, it is plastic dip spray. I sprayed many parts to protect them from damage while working on...
I am sharing all prototypes made, want people to see the process and how it works. It is a good experience to have. I did not want to make a...
31. Now, after rebuilding CBR calipers, rebuilding forks, having braided hoses I had to make brackets for those calipers... Problem was that left...
I used old clutch line and bicycle pump to push out old pistons.
30. I always wanted better front brakes and after delinking them, having braided hoses etc I got free CBR 919 calipers. So decided to rebuild...
Cleaning the engine bay was some task... bike was not touched in 21 years or so... Valves were never done either. I eventually got hard nylon...
Broken studs were cnts.. Still had some thread after studs broke off so I put a nut on it and weld it. The studs were snapping just behind the nut...
I found it easier to assemble main and rear frame , then do wiring and then lower it onto the engine.
Parts were sprayed with heat resistant paint, then lacquered. I am considering to make a clutch window... Don't know yet, have to think about it.
Only few exhaust valves were in spec, other were near at the limit or too tight. Mileage 41k miles.
29. Valve check, new clutch plates, springs, covers powder coated, all seals and gaskets changed, engine bay cleaned, lots of jobs done. Few studs...
28. Wheels powder coated... few bolts broke and had to drill, one was done with helicoil...
Handles sprayed.
27. Top and bottom bridge rebuild. Main frame powder coated too.
...
Separate names with a comma.
