With 10% ethanol in most regular gasoline these days it is not wise to leave fuel for any extended amount of time without using some type os fuel...
You will have to pull the tubes to see if they are bent, that is the only way to truly know like tink says. If you loosen and then tighten like...
Whoah, you are running sans fuel filter? If you have ANY rust in your tank I can take a pretty good guess at your throttle response problems....
I decided to go with an automotive flasher relay after having problems with the Honda Omicron- the honda one is ridiculously expensive as usual. I...
Something clogged with the CA emissions stuff? Something might of made a nest in there and would limit the air coming in.
If it says RC24 or Rc26 on the engine case # then you have a gen 2 with the wonderful gear driven cams. I am pretty much sure you do without...
Did you run a fuel pump volume test? It sounds like you have a fuel delivery problem.
Recheck the float valves and maybe set them lower. Air filter OK? Carb jest and passages thouroughly cleaned? Spark plugs recently changed? HT...
The 750's are more rare, I don't have actual production numbers to give you, not a whole lot of difference HP-wise between the two.
Ah, quick on the draw Toe...
Foot powder or some type of powder on the fuel rails will help zero in on the exact location. My last leak had a chunk taken out of my fuel rail...
It will say RC24 or RC26 on the case also, yes?
Not if they are anal.
Stop to maybe 5 mph, very low speeds.
Could the ticking just be the cam gear noise? I don't remember bearings making ticking noises.
These VFR's tend to be a little high on the center of gravity (like my CB750) and you must use quite a bit of countersteer at low speeds. Once you...
Congrats on the VFR score. First things you will want to works on after you get the brakes sorted out is your suspension- you will want to get the...
You might be able to get away with the 120 on the front, the 80 is a smaller ratio, it depends. You might be able to get away with the 150- again...
When putting my dive stuff back together on my 86 750 I was able to do it by hand, you must be assembling it incorrectly if you have to resort to...
You should not have to rejet for the Yosh but you might want to shim the main needle is what most people do.
Separate names with a comma.
