If you do it (run out of gas) near an on ramp like I did you might get hit by a car and take an ambulance ride to see if you leg is broken and...
You probably have it set too stiff but odds are your stock Showa is toast by now any way. That aids in you nearly flying off your seat on each and...
Is your tank vent in the cap clear?
I bought a worn out corbin on the fleabay that was kinda manhandled but would be a good start for them to make another (The cover is still good...
If you have the stockers on and they are toast from road rash/rust if the pipes that connect to the headers are still decent you can cut the old...
rider pretty much described it but if you want detailed step by step either crusty or toe cutter is your man and then Bob's yer uncle.
Ha! I saw that too, ya couldn't just wash the damn thing off?
What size of soldering tip do you guys recommend? I assume a V chisel tip?
Vanished in the intarweb ether...
For someone that would say "I would never buy a Honda" I hate to say it but that is one of the worst bikes to possibly buy, that or a 1st gen 750....
What ratio of mineral spirits to linssed oil do you recommend using?
some of the 750 guys have used wintergreen oil to soften up hardened rubber bits, not sure it it would be good for this application.
I usually run 38 front and 42 rear on my dunlops and they seem fine but I don't get much of a chance to get into twisties as of late.
For my bike that did not have a centerstand yet I used a rear swingarm stand and a jack on the oil pan. You have to be very careful because this...
So I assume this is the FII with the large, square, single cluster over the rounded two piece jobbers?
Fram es caca. Pay more pesos.
Yeouch, that is painful. 200 bones for a valve adjustment, ouch.
yeah guys, quit bidding on crap so early in the auction, all you do is ramp up the price. Wait until the end to bid.
From your Honda dealer or Honda on the intarwebs. Aftermarket yields no gains here. Be sure to change the copper crush washers on the drain bolts...
Did you check the readings after you completely adjusted them? And you did the two feeler method?
Separate names with a comma.
