Raise your idle about 200 rpm. This should help with the hesitation off-idle issues. If not, then you may have carb issues.
Just as an FYI, when you hit the starter button, the headlight will go out to allow the full power of the battery to start the bike. It's gotta...
It also works great for cleaning "pattern" scratched DVD's!!
No. How did it stall? Gradually peters out until you couldn't keep going? Is your tank rusty? How's your fuel filter?
Also forgot the gearing is slightly different. The front gear for the '83 is 17 teeth instead of 16 teeth for the '84-'85.
Many racetrack classes practice the mantra, "Be smooth, then speed will come automatically"
17/44 700 is 16/44
1. Actually, you have the terminology incorrect. -The large Hex Head jet is the MAIN jet. What the Main Jet screws into is the "Jet...
Since your bike only has 15K miles on it, I would go for the oil-mod. I've found that most bikes still in existence either didn't need the oil...
Harbor Freight is your friend: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92527 $16.99 I mounted mine on the side of my...
The rear valve cover can leak oil onto the collector pretty easily if the rubber valve cover bolt washers(#7) are hard and won't compress or stay...
Here's a pic of the bike with the tire. Personally, I would not go larger than a 150, but the 160 is what the PO installed. When riding,...
I'm used to larger CC carbs, but this should get you headed in the right direction. The big spring is placed horizontally between the throttle...
At $80/hr, that's 3 hours - if they knew what they were doing. I don't think I could even do it in that amount of time. Bet once you bring it...
That was me - and it will get you pretty damn close... If the carb was rebuilt badly, the tiny cotter pins on the linkage ends could come loose...
It drains the float bowl. For use when the carbs are on the bike. Drain the carbs before taking them apart...
The front ones stay on all the time. The rears only light when signaling. However, on my Magna, I ran wires from the front right and left turn...
I have an Avon Azaro 160/60 on mine that the PO put on. Looks good and hasn't lost a bead yet. Since it was brand new, I'm going to run with it....
Don't use the carb cleaner until you've removed the piston diaphragms "sliders". They are thin rubber and carb cleaner loves to eat them for...
It makes it alot faster to loosen the boot clamps and easier to work on the carbs. No phillips heads to drill out. Every single phillips screw...
Separate names with a comma.
