One of the motorcycle rags I read had an article where the writer added the Speigler handlebar clamp and handlebars to his mid 90's ZX6. Writer...
YES IT IS BAD!!! If your oil has a chocolate milkshake color, that means your headgasket is blown and is leaking coolant into the oil. You...
On your bike, it should be under the left side plastic cover under your seat. The connector to the stator is not really designed to handle the...
"Burp" the banjo bolt at the MC. You have air trapped in the junction.
Some bikes, like the 01 Honda CBR 600F4i, have one headlight lit for low - the other headlight is for high.
Just don't get over-confident. Ride aware. The suit allowed you to redirect some of your $10 total worth of attention from worrying about...
It doesn't really have to have one. Same reasoning that only one leg has the TRAC anti-dive. If one leg has the rebound spring (to keep it from...
Ok, first what caused the old relay to fry? Second, what fuse blows when you hook up the relay. Is it when you hook up the relay, or only...
For regular sticker glue, WD-40 works great. Use it all the time on the plastic items you buy at the store where the price tag is stuck directly...
Dizzy, no direspect felt. You are 100% correct. My mistake as I did not realize twisted had an '86.
E-mail this guy: billycarrjr@earthlink.net. He probably has them. Be sure to mention my name. I've dealt with him before and he's a good guy.
Here are some more pics: [IMG] [IMG]
I'm pretty sure they would not work as the heads are different. My PO put a Sabre head on my 'Ceptor. It fit, but bent the tensioner so there...
Gained most of my knowledge from practicing what I read in Keith Code's Twist of the Wrist II. I re-read it every season and learn and implement...
If I'm interpreting your statement correctly, the throttle shaft plates (think you call them 'shutters') are not sealing in the carb bore....
For a newbie rider, slow down to the speed you want to go into the corner BEFORE you turn the bike. Once turning the bike, gently increase...
Gas smell - stuck float or leaking petcock. Remove petcock and clean/inspect the o-rings. This may fix the leaking petcock. Also, I turn off...
I use the 60% rule. Ride using the middle 60% of the rpm range when just cruising. Don't cruise below 3K rpm - as was said before, you're...
Is your oil fill cap on tight - and with an O-ring? If you have a separate dipstick - same question. Always, ALWAYS check the simple stuff first!
A bad carb sync can also cause the symptoms you describe.
Separate names with a comma.
