Missing a washer in the axle assembly? Thereby forcing the rotor against one of the calipers?
Get a pair of small hemostats and see if you can get a grip to turn and pull at the same time.
Looks like yours was designed to pull it out from the left side by turning the seal sideways and pulling it out. Worth a shot...
Look at the "Related Pages" links: Clutch - SabMagFAQ
This may help: ValveTrain/Cam & Sprocket Installation - SabMagFAQ
If your float valve needles are not sealing, the gas will leak into the combustion chamber, causing hard starts. Smell your oil. If it smells...
You can insert a paper clip end to push back the metal tang and remove the spade from the molex connector. Inspect it, clean it off and push it...
The VF750/VF700F seat and cowl are interchangeable with the VF1000F. I have a VF700F that all I've done is remove the vinyl seat cover. I still...
Your's are probably slightly different, but this should give you a good idea: Front Forks - SabMagFAQ
Sounds to me like you need a carb sync...
In the manual, it should detail how to perform a fuel flow test. Usually, it is performed by shorting the valve cut relay which powers the pump...
This may help: Carburetors/Tuning - SabMagFAQ
I don't know if all the locks work the same, but on my bike, turning the key causes a metal shaft to push out horizontally from the bottom of the...
Before you get a new pump, be sure to test it first. It may be that the fuel cut-off relay is bad...(if it has one)
NO SILICONE is needed. Probably the most important part is getting all the gasket off the block/head. If the aluminum is not shiny, then it's...
Wrong. The Cylinders are the same size. The VF700's have a shorter stroke, different cams, and ignition timing. VF750: 70.0 x 48.6 mm...
The stator gasket can be made from standard gasket paper, paper punch and a pair or scissors...
I disagree with GreyVF750F. The valve cover gasket does not need any sealant. And the chance of a piece of sealant getting into the oil and...
Fix it right: CoolingSystem - SabMagFAQ Replacement fanstat from $14.99 and up. The steam coming out of the radiator means that the radiator...
If your rear valve cover gasket is not split, you don't need to replace the gasket! 90% of the time, the oil leak is caused by the rubber...
Separate names with a comma.