I gotta say, I do ask myself several times a year Why the F@#k I do this with old bikes sometimes. Gluttons for punishment I guess we are
Good Move Jim. In my experience battery life without them is abysmal.
I have had pretty good luck with the Motobatt AGM's, hopefully this one will last. do you use a tender when not in use Jim ? they will extend...
Coming along...waiting for my Carb Kit to arrive (forgot to order it), and waiting for a new starter. [ATTACH]
that TYGA pipe looks awesome !
Looks like a great project, Rogue. Ill look forward to the build. The lower fairings are a nice add.
Fronts are out. Rear M/C may be functional so ill see if I can fill/bleed and use it to pop the rear pistons
Cheers Guys, ill give that a try. I managed to get the 4 front pistons to move, hit them with WD40 inside and out, some heat and more WD40. I...
Hi Fellas, a question for you guys re freeing up seized brake Calliper pistons. My Project CB900F, was left in a barn with no brake fluid in it,...
Yes, lovely machines !!
Well, as it happens, I trial fitted the Athena ones and theyre too large in diameter to properly seat in the recessed/machined seats on the case...
PM Sent, thanks !!!
Thanks !! mine measures as follows 0.81 inch (20.9mm) x. 1.62 in (41.3mm)
Hi Chaps, looking for a Honda part for my project, Honda calls it a Bracket Retainer, part number 45112445631. One of mine is MIA. its a little...
One vote OEM, One Vote New Well, I've already Annealed them and sanded the OEM ones, so I have a choice to make I guess, the OEM are .5MM thicker...
Yea, maybe I'll anneal and sand the OEM
So, Im about to put my crank case back together and there are 10 copper washers that go under the bolts that hold the crank shaft & bearings. My...
Takes me about an hour and a half to two hours to strip 8 layers of paint off a tank - one layer at a time. I use a generic hardware store gel...
I just finished stripping the tank on my CBX750. Paint was thicker than a linebacker's neck used a chemical stripper, took off 8 or more layers...
Cheers!
Separate names with a comma.
