On the old nighthawks they had the "half moons" you're looking for. See the picture. You'd have to check the size of course, but it's an option. I...
Looks like the top of Half Dome?
Well, how 'bout that! Do you know what modification was required for the magna gasket? Maybe it's just trimming off a tab or something similar. I...
Best face plant EVER!
It's your own opinion and choice. Do you want a black seat or do you want a black seat with some red highlights? They'll both look good and no...
Jev's too! ...another 12 year old here...
What generally fails is the surface on part #3 where the rollers ride, the rollers themselves (#15) and possibly the clutch (#5). It depends on...
Here's you parts list.
Have you tried this site? http://www.ronnies.com/micro.htm I just looked there and they seem to have them.
It's rare that carbs REQUIRE separation. I've done this job many times on many different units and the carbs have to real bad (green, gold, fuzzy,...
Also, if you've got excessive smoke and oil coming from your breather you either have way too much oil in the crankcase or "blow-by" allowing...
It's not running on all 4! It also sounds as if you had a tappet back out. That's way too much noise comig from your top end. I would take the...
I would start with frame and engine numbers to see what you've got.
If you know someone at a Honda shop that still has micro-fiche cards, they should be able to tell you.
At this point in his road racing career, Pridmore is probably happy to have been mentioned.
I agree with you both. The show DOES suck, so I don't watch it.
Hopefully my motorcycle... yuk yuk
De-banking is not required.
Go ahead and wait for 16,000 miles. I used to service lots of VFR's and there wsa never a problem. I had a 96 and now have a 97 and neither one...
Here's the Yamaha stuff.
Separate names with a comma.
