Here's a good one...
From Laguna 2006. I think I did this right.
I would suspect the return in the master cylinder before brake lines. There's a small hole which allows enough fluid to move through and let the...
I seem to remember a "special tool" that actually pulls the cam up toward the cam cap/bearing, then like Mason says the clearance spec is slightly...
VFR Charging I'm relatively new to this forum so I hope this worked. I tried to upload the diagram from the 90-96 manual. There's a guy on this...
I worked in dealerships in the late 80's and through the 90's and I have to agree with you on the ego topic. In my own defense though a lot of...
Hey Sierra VFR, Do you recognize my picture?
I tried registering on a web site as "longfellow" and it ws taken. I'm just a tall guy, nothing fancy.
RonAyers.com or bikebandit.com I've had good luck with both of these. Happy shopping! Mark
You can look up the parts on a site such as Bikebandit.com or any other. I did an eleven year stretch at Honda dealerships and I did see some...
It sounds like more than one issue. The high idle sounds like the carbs were not cleaned thoroughly or correctly leaving you with a partially...
I believe they're 4mm screws with a .7 thread pitch.
Good Morning Old One! I'll be 49 on Sept. 4th and I've been riding bikes since I was 11 or 12. Didn't buy one until I was 16. I have many friends...
Ok. I tried out the balancer last night and it works great.
I see what you're saying now. Do you have a jet cleaner to do comparisons with, or may a set of small bits?
Main jets are the metering device for 3/4 to wide open. Is this where your runnablity problem is? You may need to shim a needle or something similar.
Sorry, had parent/teacher night last night and by the time we got rid of the babysitter etc. I just wasn't into it. I did uncrate the tool this...
Separate names with a comma.
