Thanks, who_iz_phil, and you are right, the cylinder head and cylinders had been painted black so I will stay with the black. If I was rebuilding...
DISCLAIMER: I may use capital letters to emphasize the importance of what I am talking about. I am not mad at you or being condescending.I...
WARNING! Disclaimer I may capitalize some words of importance. Your problem could be a lean condition (adjustable with fuel enrichment screws),...
I have a 1978 Honda CB750K. It is a 1978K model. The sprockets were 15-41 stock making it 2.7:1 ratio. The problem was that the sprockets...
I thought so! Go back to post #14.
I have used ABS glue on motorcycle parts (black plastic) and it works fine. It is the black flexible plastic. You can recognize it by its smell....
Thanks for the interest. I do not know what caused all the double posts. i will try to correct the problem.
Well I found out about that hole in the valve cover. The casting was made that way. There was no damage inside the cover. The valve covers ARE...
[IMG] This dremel wire brush tool works really good for cleaning the engine case. Only problem is that they cost $4.00 and only last about 20...
[IMG] I have been cleaning years of grease dirt and layers of spray paint to get to the aluminum. This engine had 28,000 miles and I did not want...
Below is a detail photo. I removed that center stand mount tabs also. I want to get the weight of this bike as low as possible. I will have to...
I now have the frame and engine apart. I just layed the frame on its side and lifted the frame right off by myself. It was very easy. I have...
Separate names with a comma.
