Hi All, I've been toying with the idea of a bigbore VFR800 to carry on where Honda could have gone. I've updated all the cycle parts on my...
I had one on my 86 VF500F2 in the UK for about 5 years before I sold the bike, I fitted it. It is a complete system, includes downs pipes & a...
Hi Jes, No room for reducing unions, so the silicone step was simple & only requires one hose clamp. The T-pie e stared life as a 100mm long...
Yes very probable. At the end of the day, rapidly pump the lever multiple times & then lock it back with a cable tie, cord etc & place bike on...
Thanks Tinks, what were you after ?
you will love that mini RC :) Good man enjoy.
Thanks Guys, I've got the same or very similar info from other sources, the concensus is that the MMC type liner can be rebored as per normal...
Probably feedback from the rear brake to the front slave master cylinder, which is why it was dropped on the Vtec ! On the 5th gen the rear brake...
if you rotated the linkage plates you will have altered the suspension leverage ratio, which is bad. You can't use the CBR shock without a longer...
As per the title, has anyone done this, just want to know, if it's possible & what's required to get a suitable finish for the piston ! Thanks
No special tools required. 1 x 8mm socket to remove the bolts holding the clutch cover. Check the clutch operation with the cover removed & see if...
An old trick we use for runners with fork seal leaks, is to strip the leg & then use a rotary wire brush to clean the pitted area up & rub over...
Sounds like sticking plates, but could be a few things. I'd check the following in this order. 1. When was the clutch fluid last changed ?,...
Wha ????? Why would that be frowned upon ? If the equipment is complete & in good order (both inside & out in the case of outer clothing) then...
You need the 125 x 25mm fan, it fits fine on my 5th gen, at the front inside of the right rad ! The VTR mod is JUST the VTR fan blade swapped...
maybe canadian model then !
that is the official UK/EU blue for the 2000/2001 model. The pic is not great quality, but that looks like original, see my avitar ! If that is...
I forgot to update this thread, got mine set to 4k/rpm & 100ms, works fine. Not really had much chance to play with it, but will do soon.
And just to add I'm an ex REME mechanic, who often had to work with less than ideally designed equipment, field modification is the norm, rather...
Hmm, bean counters & emissions regs, do not suit all environments. Running an engine close to maximum heat soak at idle is NOT a good idea. The...
Separate names with a comma.
