Read up a bit on HISS for the Rune (only US bike I'm aware it was used on). It is a Transponder/radio key/ECM system...and on the Rune it's tied...
You may try to troubleshoot an obvious symptom of the problem...like why doesn't the fuel pump run with the keyed ignition like a fuel injected...
That's so flippin' weird. Yes...the first thing is to get the diagram and make sure everything is plugged in where it's supposed to...
In terms of electrical I think the first possibility to eliminate is the kill switch. I would get a diagram and determine which two wires the...
I agree some clunk is normal, however you shouldn't have to use excessive force. Sometimes it helps to roll the bike either direction even a few...
Not all nations necessarily have the same recall as we do here in the US. First off, check your battery terminals make sure they're tight...then...
Makes sense...
The other fuse is for the R/R...so it looks like that's not it. Might not hurt to check the couplers to see if they've been subject to any sign...
Looks like there's two 30 fuses. I'm looking at the wiring diagram right now. Is it the one that's part of the starter relay or the separate...
The gold doohickie? Is that next to the tin colored slush pump? Freakin' hoses can be so confusing. The Honda shop manual has several...
The thick one goes to the small hole underneath the fuel cap, it's a drain in case you overfill the fuel tank. The thin one is a vent for the...
The tensioners are made to take up the slack and lock themselves, unless more adjustment is needed. The 'locking' part is the failure. They back...
Thought I'd 'weigh in' on this. I've replaced the tensioners on one 6 gen that had a bit over 20K. I think saying it's 'normal' for these...
Pobably be a good move to have this work done now...before peak season sets in for MC dealers.
I'm a 'tad' confused by your post. Is the problem your starter won't turn the engine over? If that's the case, start by checking for a loose...
Exactly. There IS a recall on this issue, no time limit, no charge. The dealer needs your VIN to check for certain it is covered, if there are...
You can do it...it takes finesse, not strength. Practice makes perfect...have a friend for support until you get it down. Wait 'til you get...
I work on both Honda and Rotax engines (the RSV uses the same 990cc engine core as the Can Am Spyder). If you ask me, reliability in terms of...
Squirrelman...yup, the gear driven ones sure are nice in that way. The six gen models are encroaching on Desmo territory for valve adjustment....
You're being clear...the brass tube is broken/corroded off the petcock. It does you no good anymore. Yup...the plastic mesh filter tends to...
Separate names with a comma.
