Any trick tools to get at carb #2's sync screw? It's like the angle is too far down so the coolant crossover gets in the way. Tempted to unseat...
I had some free time today, so I decided to hook up the Carbtune and see how out of whack my bench sync is. Not terrible. #2 was the most out....
Rebuild kit upper right. Contains 2 pan head screws packing gasket and lower bowl oring. Disassembled petcock pic. Selector, wave washer,...
The seat cover is pretty comfy [emoji12] and in pretty decent shape too. Wrong color scheme but oh well Sent from my SM-N950U using Tapatalk
I got the replacement petcock screen in the mail today. It did Not come with the rubber piece in the middle that supports the screen on the fuel...
Almost forgot about the cracked carb. There was definitely a vacuum leak here. Just look at that dent! I have since filled the crack with JB...
Well isn't that lovely! Someone used a prybar to try and seat the carbs, and busted the airbox. Not once but twice! You can see the witness...
I've been lurking around here for a while, since picking up the 07 VFR. Now I've done it and picked up a VF500F [emoji16] Thought I would share...
Found the JT part numbers from Parts Unlimited and cut and pasted into Google. JT sprockets stock size on Amazon. And the chain on eBay....
It seems the OE stuff is NLA, so what are my options for sprockets? I can find a 530 oring 108 link DID chain, but I'm having issues finding...
There is a 30A on the starter solenoid and a 30A on the positive battery cable going into the harness next to the battery. Sent from my SM-N950U...
DM me if you are parting it out also. Sorry to hear she's done [emoji17] Sent from my SM-N950U using Tapatalk
Thanks! Love roadster cycle. He hooked me up with a replacement regulator kit for my 6th Gen Sent from my SM-N950U using Tapatalk
I was hoping someone has replaced the stock unit with a more modern R/R.. and there is a thread about it.. maybe a sticky? I'm not too familiar...
It looks like stock equipment is a Shindengen unit. Anyone know if an FH020AA will fit in the stock location? Thanks Sent from my SM-N950U...
Made the repair with JBweld. It's not the prettiest, but it's not noticeable unless you're looking for it. Seems to have fixed the vac leak...
Thinking I can sand down the area and make a JB weld patch over the cracks. Sent from my SM-N950U using Tapatalk
Good Lord. That was straight up abuse from some moron before me. Look at that witness mark! You don't need prybars or hammers to pull or seat...
They were eyeballed on the bench. Valves will need to be adjusted I'm sure, so I'll save the feeler strip sync for later Radiator has a leak...
[MEDIA] Getting closer. That's no air filter housing cover. Open base to carbs. Bench/eyeball sync. I need to do a little better carb clean I...
Separate names with a comma.
