Nice RWB! I have one myself. Honda could have done just fine without the VTec.. but it scoots along just fine in 2v mode. [emoji106] Sent from...
Ah well ahem.. I thought this was the Sabre/Magna forum. My apologies. I have not changed the rear head in frame on an interceptor. Magna, yes....
Shouldn't have to remove the head to replace the rocker pads and cams. But the frame gets in the way of taking the rocker arm shafts out IIRC.....
Head gaskets for the 750 are Very hard to find OEM. Sent from my SM-N950U using Tapatalk
Yes, it's possible. Not easy or fun, but possible. I've done it. But if I had to do it again, I would just pull the engine. Did you find a...
Well, she holds fuel now. Guy had to patch in metal because it was so perforated after removing the existing liner. And that the liner was so...
Only cut the lip slightly wider than the thickness of the new seal. Then you can insert the new seal like dropping a coin into a n arcade game or...
"With a dremel you cut a "slot" in the crankcase lip the width of your new oil seal. You then push the old seal in and spin it with tools, then...
Good lord that beautiful Sent from my SM-N950U using Tapatalk
I need this color [emoji7][IMG] Will consider trade for my RWB Sent from my SM-N950U using Tapatalk
2 Interceptors, 1 Magna. Always looking for more[IMG] Sent from my SM-N950U using Tapatalk
Wow! Hopefully that is the only issue you have, and they gave up after that fail. Sent from my SM-N950U using Tapatalk
Tank went to the shop today to be burned out and soldered up. Can't save the paint, and I'm not having the dents pulled. It is what it is. I...
Finished the wiring up yesterday. Added an inline 30A fuse to the positive, and direct wired to the battery (+ and -) with 10 g wires. Edit:...
I agree. I used the 2k spraymax? Rattlecan on my Magna 5 years ago and it is Still holding up. I would definitely do it again if I didn't have a...
Waiting on parts, so I decided to work on the charging system. I'm getting 15.5v at idle. No bueno Found an FH008EE from a 2007 CBR600RR on FB...
This is all I see about the sprocket cover/clutch slave cylinder install[IMG] Sent from my SM-N950U using Tapatalk
Didn't have time to being the tank to the shop.. but I did do a little. Rear brake rotor had some weird deposits on it.. like welding spatter....
https://www.vfrdiscussion.com/index.php?/forums/topic/84719-the-drill/ Sent from my SM-N950U using Tapatalk
A little bit of heat from a hair dryer or heat gun on low helps with install/removal. Don't pry unless you have to , then be extra careful Sent...
Separate names with a comma.
