I could part with them. I don't think I'll ever take this luggage off 'cause it cost me over $700 between the mounting brackets and the bags....
Why? If you need a set of '98 grab rails I have a set I could sell you. I grafted on some hard luggage and the mounting bracket took the place...
Two night stay OK. Price is reasonable. Contact me at abolduc@kingsburycorp.com for details.
Aerostich/Riderwarehouse has velcro wrap-ons that work great. And you can use them in the morning when its cold and then take them off as the day...
I grew up in Laconia and my friend Chris owns a motel on the water. If you want some info on cool local places to go (swim, eat, hike, good bike...
I used a 1" dia holesaw and cut one hole directly under the filament of each taillight bulb. Then glued a clear piece from half a cassette case...
easiest method is to put a radiator hose clamp on the filter right near the base, then put an 8mm socket and extension over the clamp screw and...
Stator Stator may be the culprit on your 98. Check the output of the three yellow wires from the Stator (feeding the Reg/Rec). On mine the...
new R/R Installed a Honda R/R. All better now. The aftermarket one was less $$ but didn't last. Yes, voltmeter is downstream of R/R....
Motor would likely swap fine. Would the later model computer and electrics be able to run a non VTEC engine though??
Yep, did the fan mod when I installed the aftermarket unit. Apparently didn't do the trick. Also went through all the grounds and connections,...
My aftermarket R/R lasted about three months before it gave up the ghost. I ordered an OEM Honda unit and installed it this morning prior to my...
BTW, for all of you with CBR600 friends, the '98-01 VFR centerstand bolts right up to the attachment points on a CBR600F2 (they came with no...
use the centerstand On a solid floor you can turn any bike around on the centerstand. Just pull it around. the centerstand will vibrate a...
cam drive drop the v-tec, drop the linked brakes, drop 60 pounds, and where are the gear driven cams?
Replaced my R/R and stator last month due to the usual troubles. Installed a voltmeter and everything was fine (14.4V running down the road). I...
www.aerostich.com Item #4636 is much like you describe.
The steering head bearings have a preload spec of X amount of torque on the steering head nut. If the bearings are not preloaded at the spec'd...
remove center and sidestand, remove mirrors, tape over the headlight and taillight, unplug headlights, tape over speedo, fresh brake pads in the...
Hi, Check to see if something has bult a nest in your airbox. Squirrels or mice or something. Prop up the tank and remove the cover of your...
Separate names with a comma.
