The sound of 8000+ RPM screaming in my garage Update !!!! The sound of a V4 screaming at 8000+ RPM in my garage never sounded so sweet....
Just thinking that you would trouble yourself to help someone you don't even know is an excellent judgment of your character. Thank you for your...
New jersey
I really did not want to touch the valves. I kept pushing it out of my mind as I know it will not resolve anything with the bad hesitation. My...
Yes I did. I took the slip-on off and ran a long flexible pick-up tool through the header pipe and I didnt pull against anything. When I had the...
I thought about it too. But for 8 bucks each, at least I know they are clean. I used a guitar string to clean out the idle jets. I think I got it...
Quick update. I picked up the carburetor from the honda dealer today. The manager told me that the carburetor I dropped of the the ultrasonic...
One more odd thing I noticed. When I took the carbs apart so I could get the ultrasonic cleaning done, I blew through the float bowl vent holes...
I'm not a blues player, I'm more into country and 80s rock. As far as the bike goes, I'm running out of options. If the carb cleaning thing...
I never take insult to criticism, it helps me take a look back and see if I could have done things better. As far as mixing parts from one carb to...
I like 9s of my electrics, however I do have 10s on my less paul. I tried 9s on it but it threw off the neck. I took your advise and ordered 4...
Why did you you think it's not a popular option? The company back the part up for one year. It's the fraction of the cost of a OEM one. The...
I always removed the rubber diaphram prior to blowing compressed air through the carb. I read about that some time ago when I was cleaning out the...
Yes, the bike did sit for 5 years. There was a few mice nest in the bike. I inspected for damage wiring. I only found a couple damage wires, not...
Wow, what a post. Thank you. I must admit that is a lot of help. Unfortunately, I already removed all the idle jets and ran the second thinnest...
I can actually blow through the hose that goes into the secondary air filter and the four slides will move full travel. I believe that tube goes...
I did find one valve out of spec (.11mm, should be .16mm +- .03mm) but I doubt it's enough to cause a problem. I did went ahead and ordered a shim...
Well, as you said the pump is flowing. I checked the pump flow per the factory manual. I measured 200cc for 5 seconds. I did it five times and...
Ok I just checked all the valves for clearance. Specs says Intake should be .16m +- .03mm and exhaust is .25mm +- .03mm. The rear head all falls...
As far as the idle jet, I did get it clean. I can see light through it. I can also see light through the 3 small pin holes on the side of the idle...
Separate names with a comma.
