Hey there, no there hasn't been a fix to this problem yet or i would have been sure to post it. I got the bike fully restored and never did figure...
Those are all excellent replies guys, thank you! I actually have done a compression test but it was quite sometime ago, im pretty sure it was all...
Any more help here guys and gals, i know that this isn't normal, im just not sure what would cause the vacuum to be all over the place, my cv...
1bd85vf500 your pm is full. How much do you want for the starter switch assembly (right control assembly) ?? Also i might be in need of some valve...
Ok guys, sorry its been so long without an update, but life is pretty busy these days and i haven't had much time to work on the bike. Here's...
Thanks for the advice DKC, exactly what you have just said is what my next step is. I will report back and let you know. Thanks again! I really...
I actually mentioned it in my reply that i started out by asking if the CDI Boxes from an '85 bike would be the same as for the '84. I think i am...
Thanks again DKC, i actually checked out the pickup coils at ambient temperature and both were right within specifications, so that rules that...
DKC, thanks for all the help so far, and everyone else as well!! I actually managed to get a proper factory repair manual in my hands now. I have...
Ok so first thing, i have a question. Will a CDI box from a '85 vf500f work on my '84 vf500f? They seem to have different part numbers?? Other...
I havent actually tested the pulse generators with the engine hot, but i know for sure that the problem with the revving is still there when the...
Sounds good jamie, I think i already checked the resistance on those when i did the resistance checks on everything else, but i will recheck them...
The air filters are good, as a matter of fact ive run the bike without the air box on it just to make sure. The chokes are all working properly...
Im think another CDI Box is what is in store squirrely, once i prove this exhaust good or bad. Im going to try running the bike with only the...
Donald, first off thanks for the reply, you could probably be a huge help with this for me. I have done a compression test, all were ok. The fuel...
PS: What should a guy be looking for for a healthy vacuum reading, and should it be stable or bouncy on the vacuum guage needle? Thanks.
Donald, my vacuum guage readings were all over the board at idle, and im sure they are supposed to fluctuate a bit but they were bouncing all over...
Yeah, well once i get a new starter switch, i will be removing the exhaust and checking that out first. I have reason to believe the manifold...
Magnavmx5, i need a new start button because mine melted down on me. The bike sat forever and so i think now that i finally had it running and was...
Well there is certainly some good food for thought in this topic. Thank you for all the answers and things to check guys. Unfortunately i havent...
Separate names with a comma.
