UPDATE- No longer have the symptoms of losing power - Ran for 30 minutes at highway speed and it runs great. NEW PROBLEM- Now I have...
Refering to manual now for Ignition system inspection p256. I am going to try to make it have symptoms, then limp home and check the system...
I am going later today for the road test.... Take and ohm meter with me and check resistance over what connection? Yellow/black wires coming...
oh.....I cleaned my Petcock and hoses too. So you Petcock guys could be right too. There I said it,,,
Ok, Drove the bike around for a while, 30 minutes in first through third gear without incident....though the throttle felt a little "off". Took...
Because of the time sitting I think I will be very slow and methodical..... I am starting to think about the integrity of the hoses and seals....
Today I will get the chance to try all suggestions. History_ Stored in a shed for 7 years prior to this ride. Was a home to several rodents...
Again, it runs PERFECT for around 7-10 miles. I could always run it on idle for an extended time to bring up the heat and see if it want to cut...
Ahh, So it may not actually be the increase in HEAT, it may have to do with the TIME running, where it is continuing to draw particals into a...
Well, the fuel pump was just tested..which may or may not mean anything but I am ruling it out because it only happens when hot. Sound...
Hi All, Bike just got out of the shop. Carbs done 6 months ago - Dirty tank caused no start Sat in shop 5 months (long story) Carbs just...
Kinda figured. Kinda sucks. Just dropped a bundle on the carb work and new tires yesterday. Probably better it happens now then when I am on...
During transit yesterday my front brakeline broke right at the connection under the reservoir by the right handle. Is there a way to cut and...
Got it. Had to pull the triple tree. No shortcuts there. Thanks
I must be looking too quickly at it. Today I will pull the switch, look at the manual...and multi-meter in hand... check then solder the wires....
bump....bump....bump
My project bikes wires were pulled off their soldered mounts under the triptree. I plan on pulling the tree and resoldering but need the order...
The 94 project bike I just picked up has a few electrical problems that I have almost sorted. Need a little help though. Ignition Switch wires...
Yes, Pretty good shape for a start. Not even washed yet. My thought is that is spent the last 7 years in a storage shed. The engine area...
Never thought of it that way but I suppose it is exciting. One of the best thing about finished projects is the story they tell. Mine started...
Separate names with a comma.
