You always bench "synch" the carbs when they are out of the bike, its easy and a prudent thing to do. I do the "peek-ah-boo" with the butterflies...
When you get the synchronization correct the bike should idle in first gear around your neighborhood where if little harry or sally ran out in...
I thought you were in Germany! I am flying to Berlin on Sunday! Gona do the Nürburgring fingers crossed cause of the covidian stuff going on....
My 83,000 mile gen3 bike sounds better than the 33,000 mile gen3 bike I also have. Been using 20-50 changed either yearly or 2000 miles. 83,000...
PERFECT, I have a similar looking one from TUSK TOOLS. Works as it should and you may be able to hand it down to your next generation of wrench...
I think its high, just my opinion. Nasty looking zip ties, no exhaust pipe, no ignition switch = for me MAX 2700, better yet, 2500. Remember its a...
what they said above, this is mine on my 93, have a Fox twin clicker on my 91. Both of these have been serviced over the years btw. Nothing like...
Charging system? What does it charge at during idle<>? then rev it to 5000 RPM and see what the voltage is. Did you ever change the...
Nice pictures and write up! I ended up using some cottage built pistons for the rear brake caliper and must have used a donor caliper, just don't...
I saw a gen3 bike riding and I was able to say hi to the doode as he pulled into a parking garage in Deutchland. I think there are more of the...
Well, once I got married, I had to take one of my motorcycles out of the bedroom and into the garage.
My gen3 bike spent it first 30,000 miles of its life in North Jersey, filing the edges of its foot pegs down. My leather knee pucks miss it but...
Totally, I worked for a fellow happened to be a Gemini, anyway, we used to spend our entire day fixing junk bikes calling each other Vern! You...
That is why I only paid 500 dollars for my gen3 bike which cranked, so I knew at least it turned over and was not locked up. If it was a poop...
Great looking street fighter, that is coming from "super-subjective" doode. I always thought that those gen4 bikes lend themselves to modding...
When I started restoring these bikes and came to the clutch system, I found that replacing the slave cylinder was a better option for me. I get...
Watched video, I have an air assisted bleeder which has served me well with no issues doing clutches and linked brakes on bikes in the past. I...
Nice name Sugarland, you know, it comes down to economics and what your looking for. Three thousand is high for a non running, not collectable...
Probably so, make sure you have a new gasket for that side of the bike, lean it on the side stand and you should be ok - Just as a preventive...
Sweet bike, that would finish off my collection! I could own, RED/WHITE/BLUE. Really the blue one is called, Granite Blue - Anyway, too much money...
Separate names with a comma.
