Yeah tell me about it .... I have been resisting THAT temptation (and a metal bandsaw, and a OxyAcet torch, and ... :) ) , too many other house...
That is a nice way of doing things ... I was trying to figure out a way to get the stiffness required, to maintain the arc, without having to goto...
Hahaha .... those were legally aquired, They are just being stored off season (Auto-X) for the club I belong to.
Decided to add a vertical support that tied into the passenger grab handles I Measured and bent up some brackets that tied into a upper mount...
YUP - with the mounts cantilevered out from the sub-frame the weight of the bags will want to rotate the mounts down and in. All that is currently...
Project#1: Custom Givi Wing Rack Mount for 3rd Gen One of my plans for next year is to do some longer distance touring, but I have found that the...
Ooops ...Forgot to mention it is a 86 VF500 ... so it sounds like it "may" be easier than a 2nd Gen Squirelman - Why butter only the valve...
Well I have the bike inside and prepped for winter (Pulled the gas tank, Battery out and on trickle charge etc) and I am doing some maintenence...
A couple of months ago I picked up a set of Airtech lower fairings that we in need of some love. They were cracked here and there, had some...
Apparently Carfax will sometimes pull records on bikes IF the information is uploaded by an agency Carfax and other sites will often allow you...
I do not know if it is the same in the US with CarFax CARFAX - Vehicle History Reports and VIN number check ... but I ran (bought the...
LOL - Well this thread is officially gone off the rails completely :)
YUP - 28L and they expand to 35L
Givi 449 On the Bike [IMG] [IMG] [IMG] Moose
I think when Jaimie Machined the caliper bracket for more clearance (when you sent it back) the bolts that hold the "stub attachment" became too...
The extra length of the stub on the swing-arm (Relative to the swing arm that DMr prototyped on), pushes one end (stub end) of the caliper bracket...
40C (104 Fahrenheit for you "Mericans")is too damn warm to be working on a bike !!!!! [IMG] [IMG] There are two measurements of the...
Slo - Try swapiing the bags around - the "uptilt" on the opposite end may give you better muffler clearance You should be able to shorten...
YUP - plus it is a good excuse to lube up the rear caliper slider (the fronts were bone dry when I swapped on the EBC Sintered pads) Mooose
Hmmm I wonder if I just pull the axel out just enough to drop the right side spacers and Caliper bracket if there is enough room to then drop the...
Separate names with a comma.
