I removed the paint from my wheels with an epoxy paint remover that I got from the Home Depot. I just brushed it on and then hosed it off. It took...
I buy my chain and sprockets from Sprocketcenter.com they have good prices and ship fast.
On the west coast it is on NBC sports at 12 noon.
The ECM can't be adjusted,but a power commander can be installed that gives you the ability to adjust the fuel mixture.
I think that the hole is there to let any thing that leaks between the cyclinders to drain out. The hoses for the cooling system converge under...
Another thing you might check,after one of my oil changes I put to much oil in the crank case. It was past the top of glass when on the center...
I think that because the bike isn't moving when you apply the front brake,the piston on the front left brake doesn't apply pressure to the linked...
Well let me try to help you out. I assume you mean the clutch side cover on your bike. If so there is a large about 1 to 2 inch cover usually...
good to know what it stands for. Next question,I have new Ohlins for the rear on the way and I have to decide what to do with the front. Ohlins...
Does any body know what HMAS stands for in Honda suspension? Could it be Honda Makes Awful Suspension!
My textile jackets have a tag that says you can machine wash them. So I took out all the pads and washed them, then air dryed on the back of a...
I did it to mine when I added a turbo city fuel pressure regulator. They where a little out. After I did the synch the bike ran and Idled smoother...
I was out for a ride when a guy on a Yamaha R-1 pulled along side and wanted to go. I gave chase,he left me like I was parked, and before I knew...
Since you said the bike was dropped on the throttle side of the handle bars it is possible that the kill swith on that side is damaged and not...
I'm thinking Ohlins or Penske
Let me see camera on front fender facing straight up ? I know I'm getting warm
I have a Ford F-350 van with a V-10 and I had the same problem no light came on . The mechanic said that he would have to replace all of them,but...
I have replaced a chain and it was pretty easy. I used my trusty Sawzall with a metal blade to cut the old chain it went like butter. I bought a...
I might be going out on a limb here but possible having the starter valves synched might help your motor run smother.
I bought a kit from www.thetankslapper.com it was not too expensive and easy to install hope this helps.
Separate names with a comma.
