damn. That seemed very easy. Where did you learn about the front end ? I think I may over looked it but what is that tail off and how hard was the...
06 gsxr 600. I tried r1 but it looked horrible as it stuck out too far. here is a close up. I got really lucky because subframe is from 06 gsxr,...
left side exhaust is made by viper. I have one. Its headers and slip on. The muffler used to be huge and then I cut about 75% off of it. For some...
There is no reason to remove carbs or tank for the thermostat, well at least I didn't. I have a numbered temp gauge and I never see anything above...
i can tell you the easiest and cheapest way to replace gauges is an 07 and up cbr600rr gauge cluster. [IMG] [IMG]
yeah im lucky when I get even half way to that
thanks. Used the ECT sensor with plug off an 09 cbr600rr. Pretty simple and you only need to use the grey with red stripe wire and wire it to the...
After tearing my bike apart there was no way I could go back to the big factory gauge cluster. Its pretty simple wiring. As a heads up there are...
ok not going by the manual at all and being completely lucky the switched wire is brown with white stripe. good luck
grey and black should be fuel level as green/black is ground ( I say this because its shared by every gauge) and brown/black goes to reserve...
Gas has 3 wires. Ground, low gas and fuel level. I use the fuel level because my gauge can display it.
Thats true. I just wanted something cheap and easy to wire (so I thought). Wiring has become a hair puller and not because its hard but because...
Im in the same boat but i got an 08 cbr 600rr gauge setup because it tells me fuel level. I need to start wiring it soon
looks good but what are you going to do about the oem gauges? [IMG]
I tried what he said. It didn't work. I needed 6 inches. And rerouting his way really gives an.extra 2 inches. I had to order new cables and brake...
i just ended up ordering cables from motion pro.
any Honda RR from cbr 600/1000 will work better and be cheaper
I tried to do it with a sledghammer but no budging so I busted out the 99 Honda accord and went to town. Its nowhere near perfectly flat.
some more shots of the exhaust [IMG] [IMG]
Oh and yes the heel guard clears it by almost half an in CH
Separate names with a comma.
