This is very correct, however chassis geometry has known good and bad ranges. This is especially true when it comes to the front end (rake and...
Please shoot me another email. Thanks!
Instability will rear its ugly head even at very moderate speeds. You won't feel a tank slapper or anything, it will manifest itself as a feeling...
Going just a bit higher in the rear is enough. I suggest +3mm at the shock which is about 10-12mm at the wheel. Do not lower the front. That...
Some, but not a lot. Why?
Step 1: Put S-man on your ignore list. Step 2: Ride that bike and enjoy!!!!
Yeah, I wish that was possible because it would be a lot easier. In order for the conversion to work the shock itself must be machined. That...
Usually this is determined by how the bike is running (functional check). Is there is a reason you are asking?
+1!!!!!!!!!
It's like night and day, totally different. Yes, it has the same access are your stock shock. If your adjuster was stuck and you forced it then...
That's not surprising, those Showa units hold up very well, better than aftermarket shocks in fact. I think as you have already found out,...
The 929 conversion only works on the newer models. For your bike I have something different that starts with a CBR shock that has the reservoir...
Here you go! Daugherty Motorsports - V4 Honda Carb Removal and Installation Procedure
You bet, I build a lot of shocks for the 3rd Gens. No problem shipping to Spain, I ship Internationally pretty much every week. Take a look at...
Just to clarify: even if you do not add air to the forks you will still need the crossover collars, or have the holes in the forks welded shut....
You are absolutely right - you cannot just replace the spring. You would also need to change the internal valving and adjust the stroke length of...
There sure is! It is under the large silver cover on the reservoir. Use a pick to pierce a hole in the cover them pry it off. No need to put it...
Nail on the head. I've been preaching this for years with minimal success. The only time the rear brake is useful is 1) when sitting still on an...
Worth pulling the clutch side case cover for a quick inspection. Best to not get hopes up too far though, at least that is my experiences.
Wow, a VFR750 supermoto. Sounds like fun!
Separate names with a comma.
