yes, I first tried with the carbs filled directly in the T shape tube then through the fuel pump, but it took 3 minutes at least idling perfectly...
No, I meant this [MEDIA]
Oh ok, my exhaust doesn’t flow any smoke whatsoever, and don’t smell like fuel neither.
I would exclude a blown top gasket, ‘cause last time was the carb #1 and #4 who emitted white smoke, whilst now is #4 and #3. Another right guess...
I managed to start the bike again, but the same issue persists: initially, it starts wonderfully, until the rpms begin to decrease gradually and...
Guys just a quick info: could you explain me what these holes are? The ones circled in red and blue. I read that a overfilling carburetor could...
I started the motorcycle, but I noticed that when I turn it off, white smoke comes out from cylinders #1 and #4 (much more from #4), while nothing...
Today's updates, the bike started. I did something that you may not like... The floats height of carbs #2 and #3 are set at 8mm, while carbs #1...
That was my first thought, but the float valve is new and the problem occurs even after cleaning. Yes, I checked for those washers as first thing...
Some updates. I found that the issue causing carbs #1 and #4 to overfill is NOT related to the floats. I swapped the float of carb #3, including...
Ok thanks, I’m gonna leave the measurements on B position then. I started again from the beginning, starting from float height at 8mm: Carbs #2...
Considering that I measured them in both positions and both gave me the same results, what do you mean specifically? Suppose the red line is the...
Set all the floats at 9mm and done clear tube test: the fluid of rear ones is over the line, the fluid of back ones is below. I guess I have to...
didn't see your edits on this post. sure gonna try that if it won't start after 3 and 1/2 turns of mixture screw
I wish I had known earlier...anyway I set them at 7mm straight, as manual says. I don't mean to be arrogant but I'm confident about the carbs...
Yes I imagined that, but I’m on a test field now until it starts up again
Yeah I got it right after Captain noticed my misunderstanding, thanks. Yes, I did everything like in that post (I’m doing this so many times,...
I understand your feelings, but I’m pretty sure I didn’t miss anything during rebuild or did something wrong. Now the engine doesn’t give me...
My idle adjust screw is set at 2 turns, is that too high or too low?
I tried to start it, the bike seems to start, but then it stalls. I checked for fuel leakage from the needles but there's none. Now, the battery...
Separate names with a comma.
