Well it doesn't really look nasty. Maybe I have OCD, but I saw some white buildup on the inside and decided while I have it off to do all the...
I just put in a new thermostat that opens about 10 degrees cooler, and the temp sensor seems to work fine. And if the thermistor is the switch...
so i suppose you mean soak them in the citric acid. What should i use once the whole system is back together to clean out the other components...
I was tempted to use CLR but I was thinking about diluting it a little bit so its not as acidic. I'll do the coke twice in a row and see if I...
well I was thinking about using something to soak in it for a couple days and try to get a lot of stuff out that way. Then when it's put back...
Well the lime isn't my fault, I picked it up with 11k miles from the original owner less than a year ago and took the whole coolant system apart...
I feel like a douche for making so many different threads but I don't think a big cluttered thread is any better. At the moment I'm doing...
The email i got back from Dodge a few months ago said that you can order them over the phone and the price is 269.00 + shipping if i'm not mistaken.
Not at all, I was just speculating that since the fan switch had 2 bayonet connectors instead of one connector like my fan switch did, it might...
Actually, upon further inspection I believe one of the prongs could be one of 2 things 1. the switch also serves as the temp sensor to the temp...
The original fan switch says KF3 and 100-ON I'm guessing that means 100 degrees celsius which is 212 degrees fahrenheit. Now I just have to...
Also, with the temp sensor switch in the radiator, it ISN'T a 2 prong connector. The one on my bike goes into the lower radiator instead of the...
Those would be the cam chains under the valve covers. I hope to god one of THOSE didn't fall off.
Yeah, I actually just went on fleabay yesterday and ordered a whole set with washers and seals for under $15 shipped just in case I decide to go...
I avoided it for a whole day after I broke that bolt off but it was bothering the hell out of me so I had to do it. New lower temp thermostat is...
Well, took that thermostat back to the auto parts store and got a thermostat in the mail from Autopartswarehouse. Turns out the brand of the...
Well I went out at 1am to the cold ass garage to get that sucker out and ended up getting it out. It wasnt sticking out but after an hours work...
Well, the valve lash has been set all around at .006in. I believe every valve was about the same before i adjusted them (same being quite a bit...
my manual is the Honda manual, not a clymer or other brand. Another question is do the carbs have to be re-adjusted after the valves are done?...
if that's the case i believe its the opposite problem. They're so close together i couldn't tell they were 2 separate stems.
Separate names with a comma.
