Well it was 82 degrees today so I went on the longest ride I've been able to for quite a few months. Last season had some problems and shelled...
I've moved the bars on my 700 a little bit. I imagine as long as they don't touch the tank or anything else at full turn either way you should be...
Well unfortunately this past holiday season I picked up the higher end approx $115 craftsman clicker torque wrench for my dad and it turned out to...
Well these recent posts have made me feel a little better about my bike. I still haven't synced my carbs yet (it runs good so they cant be TOO...
I also am in need of a shock. The hagon and others are definitely out of my price range so I think I'll go the Daugherty route. It seems like...
Well that definitely helps. I wasn't too sure if the o-ring would seal well enough if it's only turned in with the vacuum hose. As for the...
I wish I was that lucky. Cylinders 1-3 are literally right out in the open. Cylinder 4's screw is only, say, 3 or 4 inches back but the...
I have the tools the only problem is the 4th cylinder screw is going to be a bitch to get my tube screwed in because its way far back in there...
How big of a difference does outside temperature make when you sync carbs? If there's snow on the ground isn't it a little cold to be syncing...
I don't really know much about the 500's but I'm pretty sure that parts from it are a no-go. The 700's and 750's are literally the exact same...
If it is indeed a 1986 then it's going to do you no good no matter how cheap it is. You can use pretty much any parts from the VF750F's and...
You messed up one of your nice Pazzo levers, that's a shame. I would kill to get a pair for my VF700F but I have no idea how to get a pair that...
Fuel sender should be a red plug. It plugs in right under the front of the seat if it's taken off. Should be a big rubber/plastic collar above...
Good news and bad news. Well I'm happy to say the coolant leak is fixed. Got some Viton o-rings for $.80 a piece and got a 10 pack just in case....
I'm not too sure how easy it would be to do, but I'd remove the petcock to clean it and the gauge sensor/any other equipment, put in some good...
That would explain the shape, I wasn't even aware an oring could compress to a permanent new shape. I took some low abrasive steel wool to the...
After a couple of smashed fingers I got the pipe out. It seems the o-rings are kind of squared off on the outsides. Would I be looking for the...
Another problem is a little hook shaped tab bolted to the front cylinder head keeping the pipe in place that seems a little hard to get to with...
That was the main thing I was worried about, would I have to order these Viton or other o-rings online or would I be able to find them at some...
I don't think 78 cents will buy me Honda replacement orings. Would it be wise to get anything other than the Honda orings if there's going to be...
Separate names with a comma.
