F2 Still have the front end and rear setup as well. Send me an email address for pics or call to discuss 910 367 6814
F2 wheels Not much in the aftermarket for the F2 due to its age. I can make you a killer deal on a set of F2 wheels; $200.00 with rotors. Also...
exercises Here's a link to the Cox lower back exercises: http://walpolespineclinic.com I try to do these exercises 4 times a day to...
Parts Have you found a set of rotors? I have a good used set of OEM.
I have the Thurn RC30 bodykit on my '90 VFR and some of the LED goodies including turnsignal mirrors on my '94 CB1000. I deal directly with...
The axle is scribed to the correct position in the left leg; scribe mark should be even with the outer face of the left fork. It may have...
undertail Vinny, I have an extra set of '94-'97 header pipes for $50.00. My '90 is a lot cleaner without the lunchbox in the exhaust and you can...
On my VFR as well as inline fours I use the woodworking clamps available from Lowe's or home depot to squeeze the carb boots down into position....
Hallo, Martijn. Welkom in VFRWorld. Een goede dag verder.
5th gen parts Stil;l have the parts, call for detailed description @ 910 367 6814 or email me for pics. Email is: mike.waldron@pgnmail.com
Bent I have seen that bend used before to fit an F2 wheel with a 160 tire on the rear of a 1st gen VFR. The correct way to fit the F2 wheel is...
Clamp bolts and axle pinch bolts must be loose but not removed. The shaking is intended to loosen up any binding or misalignment between the...
Loosen the pinch bolts on the upper and lower steering clamps; also loosen but do not remove the axle pinch bolts. Put the front wheel in a...
How about a stock shock with 4K miles on it for $50.00?
Jack up Replace the VFR dogbone with one from a CBR900RR and you will raise the rear 20mm; use one from a CBR600 and you will raise the rear up...
Difference Sold my '98 VFR in 2004 when I was having lumbar problems and could not ride. While I was recovering through exercise and therapy I...
If you drill any lightening holes in the wheel, you must leave ligament material equal to the hole diameter on either side of the spoke and also...
wheel I have a gold 8 spoke; it is the original '91 color. Also have an 8 spoke in white. Send email for pics; $300.00 for either one or your...
Plastic fasteners In the specialty fastener bins at Lowe's home improvement stores there are 5mm plastic 2 piece fasteners made by Hillman. They...
F2 conversion Here's the package: F2 front forks, upper and lower steering clamps, VFR750 clip-ons, late model (oval) brake master cylinder and...
Separate names with a comma.
